cancel
Showing results for 
Search instead for 
Did you mean: 

PWM issues

stocis
Level 7
Hey all,
I'm trying to wrap my head around as to what I'm doing wrong here.
I've upgraded my 4 PWM Corsair fans recently to the Corsair LL series.
They're connected to the node pro hub for the led/light effects and from there their 4 pwm pins go to the same splitter that ends up in the CPU_FAN of my VII Maximus Ranger mobo.

Everything works as it should, lights effects etc but I have absolutely no control.
AI Suite 3 shows a PWM max fan speed of 750-800RPM.

Help?
2 REPLIES 2

Baio73
Level 8
stocis wrote:
Hey all,
I'm trying to wrap my head around as to what I'm doing wrong here.
I've upgraded my 4 PWM Corsair fans recently to the Corsair LL series.
They're connected to the node pro hub for the led/light effects and from there their 4 pwm pins go to the same splitter that ends up in the CPU_FAN of my VII Maximus Ranger mobo.

Everything works as it should, lights effects etc but I have absolutely no control.
AI Suite 3 shows a PWM max fan speed of 750-800RPM.

Help?


I can’t understand where you connected the 4 fans PWM cables... what is “the same splitter�?
Anyway, if you are planning to control your fans speed via BIOS (or AI Suite), try to connect them to mobo headers, directly if you have 4 available, or via Y splitters.
Â*
BaioÂ*
CASE Lian Li 011D XL CPU AMD Ryzen 5900X COOLER Corsair H150i Elite Capellix MOBO Asus ROG Crosshair VIII Extreme RAM 2x16Gb Corsair Dominator 3600 CAS14 PSU Asus Thor 1200P VGA AMD RX 6900 XT DISPLAY LG 34GK950GF AUDIO Logitech G560 SDD Samsung 980PRO 512Gb NVMe - Seagate FireCuda 530 NVMe 1Tb - WD Black SN850 2Tb NVMe NPUT Logitech ProX Superlight + Powerplay + Corsair MM700 RGB - G513

Baio73 wrote:
I can’t understand where you connected the 4 fans PWM cables... what is “the same splitter�?
Anyway, if you are planning to control your fans speed via BIOS (or AI Suite), try to connect them to mobo headers, directly if you have 4 available, or via Y splitters.
Â*
BaioÂ*


hi thanks for your reply
I'm using this
which was the splitter fan i was using before.