cancel
Showing results for 
Search instead for 
Did you mean: 

How do I enable wake by mouse/keyboard?

Taomyn
Level 7
I recently built a new system using a STRIX X470-I GAMING (full specs below), and everything is running well - I updated to the latest BIOS yesterday, 0901.

I have one question, how do I enable the ability to wake the PC using the mouse/keyboard? My old system this replaces had the option in the BIOS to enable wake from USB device, but I cannot see the equivalent for this new motherboard.


[/HR]AMD Ryzen 7 2700X CPU | Asus RoG Strix X470-I Gaming Motherboard | Corsair Vengeance RGB 32GB DDR4-3200 RAM | EVGA GTX980Ti ACX 2.0+ GPU | Corsair Force MP500 M.2 120GB SSD | Samsung 860 EVO 1TB SDD| Corsair H100i v2 Cooler | Corsair 250D Case | Corsair RMx 750 80+ Gold PSU
60,576 Views
9 REPLIES 9

Clouseau
Level 7
If an option is not found, just leave it as is. What is wanting to be accomplished, as stated in your post, is already good to go.

Clouseau wrote:
If an option is not found, just leave it as is. What is wanting to be accomplished, as stated in your post, is already good to go.


Want to be able to switch the machine back on with either my keyboard and mouse, just like I have been able to do with my old MSI board machine, the Dell before that, and the Dell before that one.

seansplayin
Level 7
Taomyn wrote:
I recently built a new system using a STRIX X470-I GAMING (full specs below), and everything is running well - I updated to the latest BIOS yesterday, 0901.

I have one question, how do I enable the ability to wake the PC using the mouse/keyboard? My old system this replaces had the option in the BIOS to enable wake from USB device, but I cannot see the equivalent for this new motherboard.


[/HR]AMD Ryzen 7 2700X CPU | Asus RoG Strix X470-I Gaming Motherboard | Corsair Vengeance RGB 32GB DDR4-3200 RAM | EVGA GTX980Ti ACX 2.0+ GPU | Corsair Force MP500 M.2 120GB SSD | Samsung 860 EVO 1TB SDD| Corsair H100i v2 Cooler | Corsair 250D Case | Corsair RMx 750 80+ Gold PSU


Wish I had more information on waking the system from USB keyboard / Mouse. In windows I could wake from Hibernation using the USB ports next to the ethernet port but I cannot wake from Hibernation using other USB ports and after a few hours I cannot wake from sleep using ANY USB ports.
Asus ROG Crosshair VIII Hero (Bios1105)
AMD Ryzen 3800X @4.8ghz@1.5v (chilled loop)
Gskill 32GB 4266 memory @3600 (Ryzen Dram Calculator Fast Timings)
Samsung 970 EVO 1TB nVME (x2)
AMD Radeon VII POS

MeanMachine
Level 13
Hi Taomyn 🙂 From within Windows:

Go into Control Panel>keyboard>Hardware>Properties>Change settings>Power Management then check box to "Allow the device to wake the computer"
Do the same for your Mouse.
We owe our existence to the scum of the earth, Cyanobacteria

My System Specs:

MB:ASUS ROG Crosshair VII Hero/WiFi GPU:EVGA GTX 1080 sc PSU:Corsair AX-1200i
CPU:
AMD R7 2700X Cooler: Corsair Hydro H115i Case: Corsair Carbide 780t

Memory:G.Skill TridentZ F4-3200C14D-16GTZR SSD:Samsung 500GB 960 EVO M.2


[/HR]

MeanMachine wrote:
Hi Taomyn 🙂 From within Windows:

Go into Control Panel>keyboard>Hardware>Properties>Change settings>Power Management then check box to "Allow the device to wake the computer"
Do the same for your Mouse.


Thanks for the tip, but they are all set that way - there are multiple entries for mice and keyboard, and I checked each one.

Taomyn wrote:
Thanks for the tip, but they are all set that way - there are multiple entries for mice and keyboard, and I checked each one.


I'm at the same point, can't wake from sleep/hibernation C7H WIFI
Asus ROG Crosshair VIII Hero (Bios1105)
AMD Ryzen 3800X @4.8ghz@1.5v (chilled loop)
Gskill 32GB 4266 memory @3600 (Ryzen Dram Calculator Fast Timings)
Samsung 970 EVO 1TB nVME (x2)
AMD Radeon VII POS

seansplayin
Level 7
System is AMD Ryzen 2700x on ASUS Crosshair VII wifi motherboard using BIOS 804 released on 07-20-2018.

In Ubuntu 18.04 to get ASUS Crosshair VII Wifi resuming from sleep with Logitech wireless keyboard connected to a 7 port powered USB 3 hub through the Asmedia 3.1 USB port I followed the instructions listed https://ubuntuforums.org/newreply.php?do=newreply&p=13758866
my system showed 57 different USB ports so I listed everyone of them in my usbwake file.
After reboot computer would not enter sleep, monitors would blink out for one second and then come back on.
In bios I disabled "fastboot", set Asmedia USB 3.1 controller to "enabled", set legacy USB support to "auto", set CSM to "auto", and still system would not go to sleep.
with Logitech wireless dongle directly into the Asmedia 3.1 USB port the computer is able to sleep and was able to wake from sleep.
Next I moved the Logitech dongle to different ports on the usb hub and to my surprise placing it in port #7 not only let the computer go to sleep but is able to wake it from sleep.

In windows 10 I changed from sleep to hibernate, disabled USB selective suspend from active power plan and checked the "allow this device to wake computer" from the keyboard properties "power" tab and then also disabled "fastboot" in bios.

here is an export of bios settings.

[2018/09/20 04:12:20]
Ai Overclock Tuner [Manual]
eCLK Mode [Synchronous mode]
BCLK Frequency [Auto]
BCLK_Divider [Auto]
Performance Enhancer [Level 3 (OC)]
CPU Core Ratio [Auto]
Performance Bias [Auto]
Memory Frequency [DDR4-3466MHz]
Core Performance Boost [Auto]
SMT Mode [Auto]
TPU [Keep Current Settings]
TRC_EOM [Auto]
TRTP_EOM [Auto]
TRRS_S_EOM [Auto]
TRRS_L_EOM [Auto]
TWTR_EOM [Auto]
TWTR_L_EOM [Auto]
TWCL_EOM [Auto]
TWR_EOM [Auto]
TFAW_EOM [Auto]
TRCT_EOM [Auto]
TREFI_EOM [Auto]
TRDRD_DD_EOM [Auto]
TRDRD_SD_EOM [Auto]
TRDRD_SC_EOM [Auto]
TRDRD_SCDLR_EOM [Auto]
TRDRD_SCL_EOM [Auto]
TWRWR_DD_EOM [Auto]
TWRWR_SD_EOM [Auto]
TWRWR_SC_EOM [Auto]
TWRWR_SCDLR_EOM [Auto]
TWRWR_SCL_EOM [Auto]
TWRRD_EOM [Auto]
TRDWR_EOM [Auto]
TWRRD_SCDLR_EOM [Auto]
Mem Over Clock Fail Count [Auto]
DRAM CAS# Latency [15]
DRAM RAS# to CAS# Read Delay [15]
DRAM RAS# to CAS# Write Delay [15]
DRAM RAS# PRE Time [15]
DRAM RAS# ACT Time [35]
Trc [54]
TrrdS [6]
TrrdL [9]
Tfaw [36]
TwtrS [4]
TwtrL [12]
Twr [12]
Trcpage [Auto]
TrdrdScl [2]
TwrwrScl [2]
Trfc [333]
Trfc2 [Auto]
Trfc4 [Auto]
Tcwl [14]
Trtp [8]
Trdwr [Auto]
Twrrd [3]
TwrwrSc [1]
TwrwrSd [7]
TwrwrDd [7]
TrdrdSc [1]
TrdrdSd [5]
TrdrdDd [5]
Tcke [6]
ProcODT [Auto]
Cmd2T [1T]
Gear Down Mode [Disabled]
Power Down Enable [Auto]
RttNom [Auto]
RttWr [Auto]
RttPark [Auto]
MemAddrCmdSetup [Auto]
MemCsOdtSetup [Auto]
MemCkeSetup [Auto]
MemCadBusClkDrvStren [Auto]
MemCadBusAddrCmdDrvStren [Auto]
MemCadBusCsOdtDrvStren [Auto]
MemCadBusCkeDrvStren [Auto]
CPU Load-line Calibration [Auto]
CPU Current Capability [Auto]
CPU VRM Switching Frequency [Auto]
VRM Spread Spectrum [Auto]
CPU Power Duty Control [T.Probe]
CPU Power Phase Control [Auto]
CPU Power Thermal Control [120]
VDDSOC Load-line Calibration [Auto]
VDDSOC Current Capability [Auto]
VDDSOC Switching Frequency [Auto]
VDDSOC Phase Control [Auto]
DRAM Current Capability [100%]
DRAM Power Phase Control [Extreme]
DRAM Switching Frequency [Auto]
DRAM VBoot Voltage [1.40000]
VTTDDR Voltage [Auto]
VPP_MEM Voltage [Auto]
DRAM CTRL REF Voltage on CHA [Auto]
DRAM CTRL REF Voltage on CHB [Auto]
VDDP Voltage [Auto]
1.8V Standby Voltage [Auto]
CPU 3.3v AUX [Auto]
2.5V SB Voltage [Auto]
DRAM R1 Tune [Auto]
DRAM R2 Tune [Auto]
DRAM R3 Tune [Auto]
DRAM R4 Tune [Auto]
PCIE Tune R1 [Auto]
PCIE Tune R2 [Auto]
PCIE Tune R3 [Auto]
PLL Tune R1 [Auto]
PLL reference voltage [Auto]
T Offset [Auto]
Sense MI Skew [Auto]
Sense MI Offset [Auto]
Promontory presence [Auto]
Clock Amplitude [Auto]
CLDO VDDP voltage [Auto]
CPU Core Voltage [Auto]
CPU SOC Voltage [Auto]
DRAM Voltage [1.40000]
1.8V PLL Voltage [Auto]
1.05V SB Voltage [Auto]
Firmware TPM [Disable]
Erase fTPM NV for factory reset [Enabled]
PSS Support [Enabled]
SVM Mode [Enabled]
Onboard LED [Enabled]
Q-Code LED Function [Enabled]
SATA Port Enable [Enabled]
SATA Mode [AHCI]
NVMe RAID mode [Disabled]
SMART Self Test [Enabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
HD Audio Controller [Enabled]
M.2_2 PCIe Bandwidth Configuration [Auto]
PCIEX16/X8_1 Mode [Auto]
PCIEX4_3 Mode [Auto]
M.2_1 Link Mode [Auto]
M.2_2 Link Mode [Auto]
SB Link Mode [Auto]
Asmedia USB 3.1 Controller [Enabled]
USB Type C Power Switch [Enabled]
When system is in working state [On]
When system is in sleep, hibernate or soft off states [On]
Intel LAN Controller [Enabled]
Intel LAN OPROM [Disabled]
Wi-Fi Controller [Enabled]
Bluetooth Controller [Enabled]
ErP Ready [Disabled]
Restore On AC Power Loss [Last State]
Power On By PCI-E/PCI [Enabled]
Power On By RTC [Disabled]
Network Stack [Disabled]
Device [OCZ-VERTEX4]
Legacy USB Support [Enabled]
XHCI Hand-off [Enabled]
USB Mass Storage Driver Support [Enabled]
KingstonDataTraveler 3.0PMAP [Auto]
U31G2_EC3 [Enabled]
U31G2_EA2 [Enabled]
U31G2_E1 [Enabled]
U31G1_1 [Enabled]
U31G1_2 [Enabled]
U31G1_3 [Enabled]
U31G1_4 [Enabled]
U31G1_5 [Enabled]
U31G1_6 [Enabled]
U31G1_7 [Enabled]
U31G1_8 [Enabled]
U31G1_9 [Enabled]
U31G1_10 [Enabled]
USB11 [Enabled]
USB12 [Enabled]
USB13 [Enabled]
USB14 [Enabled]
USB15 [Enabled]
CPU Temperature [Monitor]
MotherBoard Temperature [Monitor]
PCH Temperature [Monitor]
T_Sensor1 Temperature [Monitor]
EXT_Sensor1 Temperature [Monitor]
EXT_Sensor2 Temperature [Monitor]
EXT_Sensor3 Temperature [Monitor]
CPU Fan Speed [Monitor]
Chassis Fan 1 Speed [Monitor]
Chassis Fan 2 Speed [Monitor]
Chassis Fan 3 Speed [Monitor]
W_PUMP+ Speed [Monitor]
HAMP Fan Speed [Monitor]
CPU Optional Fan Speed [Monitor]
AIO_PUMP Speed [Monitor]
Extension Fan 1 Speed [Monitor]
Extension Fan 2 Speed [Monitor]
Extension Fan 3 Speed [Monitor]
W_FLOW Speed [Monitor]
W_IN Temperature [Monitor]
W_OUT Temperature [Monitor]
CPU Core Voltage [Monitor]
3.3V Voltage [Monitor]
5V Voltage [Monitor]
12V Voltage [Monitor]
CPU Q-Fan Control [Auto]
CPU Fan Smoothing Up/Down Time [0 sec]
CPU Fan Speed Lower Limit [200 RPM]
CPU Fan Profile [Standard]
Chassis Fan 1 Q-Fan Control [Auto]
Chassis Fan 1 Q-Fan Source [CPU]
Chassis Fan 1 Smoothing Up/Down Time [0 sec]
Chassis Fan 1 Speed Low Limit [200 RPM]
Chassis Fan 1 Profile [Standard]
Chassis Fan 2 Q-Fan Control [Auto]
Chassis Fan 2 Q-Fan Source [CPU]
Chassis Fan 2 Smoothing Up/Down Time [0 sec]
Chassis Fan 2 Speed Low Limit [200 RPM]
Chassis Fan 2 Profile [Standard]
Chassis Fan 3 Q-Fan Control [Auto]
Chassis Fan 3 Q-Fan Source [CPU]
Chassis Fan 3 Smoothing Up/Down Time [0 sec]
Chassis Fan 3 Speed Low Limit [200 RPM]
Chassis Fan 3 Profile [Standard]
HAMP Fan Q-Fan Control [Auto]
HAMP Fan Q-Fan Source [CPU]
HAMP Fan Smoothing Up/Down Time [0 sec]
HAMP Fan Speed Low Limit [200 RPM]
HAMP Fan Profile [Standard]
Extension Fan 1 Q-Fan Control [DC Mode]
Extension Fan 1 Q-Fan Source [CPU]
Extension Fan 1 Speed Low Limit [200 RPM]
Extension Fan 1 Profile [Standard]
Extension Fan 2 Q-Fan Control [DC Mode]
Extension Fan 2 Q-Fan Source [CPU]
Extension Fan 2 Speed Low Limit [200 RPM]
Extension Fan 2 Profile [Standard]
Extension Fan 3 Q-Fan Control [DC Mode]
Extension Fan 3 Q-Fan Source [CPU]
Extension Fan 3 Speed Low Limit [200 RPM]
Extension Fan 3 Profile [Standard]
AIO_PUMP/W_PUMP+ Control [Disabled]
U31G1_1 [Enabled]
U31G1_2 [Enabled]
U31G1_3 [Enabled]
U31G1_4 [Enabled]
PSPP Policy [Auto]
Fast Boot [Disabled]
AMI Native NVMe Driver Support [Enabled]
Boot Logo Display [Disabled]
POST Report [3 sec]
Boot up NumLock State [Enabled]
Wait For 'F1' If Error [Enabled]
Option ROM Messages [Enabled]
Interrupt 19 Capture [Disabled]
Setup Mode [Advanced Mode]
Launch CSM [Auto]
OS Type [Other OS]
Setup Animator [Disabled]
ASUS Grid Install Service [Enabled]
Load from Profile [1]
Profile Name [StiltPE3_sleep]
Save to Profile [1]
CPU Core Voltage [Auto]
VDDSOC Voltage [Auto]
1.8V PLL Voltage [Auto]
BCLK Frequency [Auto]
CPU Ratio [Auto]
DIMM Slot Number [DIMM_A2]
Bus Interface [PCIEX16/X8_1]
RedirectForReturnDis [Auto]
L2 TLB Associativity [Auto]
Platform First Error Handling [Auto]
Enable IBS [Auto]
Global C-state Control [Auto]
Power Supply Idle Control [Auto]
Opcache Control [Auto]
Custom Pstate0 [Auto]
Custom Pstate1 [Auto]
Custom Pstate2 [Auto]
Custom Pstate3 [Auto]
Custom Pstate4 [Auto]
Custom Pstate5 [Auto]
Custom Pstate6 [Auto]
Custom Pstate7 [Auto]
Relaxed EDC throttling [Auto]
Downcore control [Auto]
SMTEN [Auto]
SEV-ES ASID Space Limit [1]
Streaming Stores Control [Auto]
ACPI _CST C1 Declaration [Auto]
L1 Stream HW Prefetcher [Auto]
L2 Stream HW Prefetcher [Auto]
DRAM scrub time [Auto]
Redirect scrubber control [Auto]
Disable DF sync flood propagation [Auto]
Freeze DF module queues on error [Auto]
GMI encryption control [Auto]
xGMI encryption control [Auto]
CC6 memory region encryption [Auto]
Location of private memory regions [Auto]
System probe filter [Auto]
Memory interleaving [Auto]
Memory interleaving size [Auto]
Channel interleaving hash [Auto]
Memory Clear [Auto]
ACPI SLIT Distance Control [Auto]
Power Down Enable [Auto]
Cmd2T [Auto]
Gear Down Mode [Auto]
CAD Bus Timing User Controls [Auto]
CAD Bus Drive Strength User Controls [Auto]
Data Bus Configuration User Controls [Auto]
Data Poisoning [Auto]
DRAM ECC Symbol Size [Auto]
DRAM ECC Enable [Auto]
TSME [Auto]
Data Scramble [Auto]
Chipselect Interleaving [Auto]
BankGroupSwap [Auto]
Address Hash Bank [Auto]
Address Hash CS [Auto]
MBIST Enable [Disabled]
MBIST Aggressors [Auto]
MBIST Per Bit Slave Die Reporting [Auto]
IOMMU [Auto]
Determinism Slider [Auto]
cTDP Control [Auto]
PSI [Auto]
ACS Enable [Auto]
PCIe ARI Support [Auto]
CLDO_VDDP Control [Auto]
HD Audio Enable [Auto]
Force PCIe gen speed [Auto]
Processor temperature Control [Auto]
Precision Boost Overdrive [Auto]
Precision Boost Overdrive Scalar [Auto]
SOC OVERCLOCK VID [0]
Mode0 [Auto]
PT SATA Mode [Auto]
PT Aggresive SATA Device Sleep Port 0 [Disable]
PT Aggresive SATA Device Sleep Port 1 [Disable]
PT SATA Port 0 Enable [Auto]
PT SATA Port 1 Enable [Auto]
PT SATA Port 2 Enable [Auto]
PT SATA Port 3 Enable [Auto]
PT SATA Port 4 Enable [Auto]
PT SATA Port 5 Enable [Auto]
PT SATA Port 6 Enable [Auto]
PT SATA Port 7 Enable [Auto]
PT XHCI GEN1 [Auto]
PT XHCI GEN2 [Auto]
PT USB Equalization4 [Auto]
PT USB Redriver [Auto]
PT USB31 PORT0 [Enable]
PT USB31 PORT1 [Enable]
PT USB30 PORT0 [Enable]
PT USB30 PORT1 [Enable]
PT USB30 PORT2 [Enable]
PT USB30 PORT3 [Enable]
PT USB30 PORT4 [Enable]
PT USB30 PORT5 [Enable]
PT USB20 PORT0 [Auto]
PT USB20 PORT1 [Auto]
PT USB20 PORT2 [Auto]
PT USB20 PORT3 [Auto]
PT USB20 PORT4 [Auto]
PT USB20 PORT5 [Auto]
PT USB31 PORT0 [Enable]
PT USB31 PORT1 [Enable]
PT USB30 PORT0 [Enable]
PT USB30 PORT1 [Enable]
PT USB20 PORT0 [Auto]
PT USB20 PORT1 [Auto]
PT USB20 PORT2 [Auto]
PT USB20 PORT3 [Auto]
PT USB20 PORT4 [Auto]
PT USB20 PORT5 [Auto]
PT USB31 PORT0 [Enable]
PT USB31 PORT1 [Enable]
PT USB30 PORT0 [Enable]
PT USB20 PORT0 [Auto]
PT USB20 PORT1 [Auto]
PT USB20 PORT2 [Auto]
PT USB20 PORT3 [Auto]
PT USB20 PORT4 [Auto]
PT USB20 PORT5 [Auto]
PT PCIE Port 0 Enable [Auto]
PT PCIE Port 1 Enable [Auto]
PT PCIE Port 2 Enable [Auto]
PT PCIE Port 3 Enable [Auto]
PT PCIE Port 4 Enable [Auto]
PT PCIE Port 5 Enable [Auto]
PT PCIE Port 6 Enable [Auto]
PT PCIE Port 7 Enable [Auto]
GPP Clock 0 Force Output [Auto]
GPP Clock 1 Force Output [Auto]
GPP Clock 2 Force Output [Auto]
GPP Clock 3 Force Output [Auto]
GPP Clock 4 Force Output [Auto]
GPP Clock 5 Force Output [Auto]
GPP Clock 6 Force Output [Auto]
GPP Clock 7 Force Output [Auto]
Asus ROG Crosshair VIII Hero (Bios1105)
AMD Ryzen 3800X @4.8ghz@1.5v (chilled loop)
Gskill 32GB 4266 memory @3600 (Ryzen Dram Calculator Fast Timings)
Samsung 970 EVO 1TB nVME (x2)
AMD Radeon VII POS

mooter
Level 7
Just came here looking for a solution as I'm in the same boat - x470-I and I can't wake it up from sleep. Have checked the usual places, checked monitor settings, checked keyboard/mouse settings, and can't see any controls in BIOS that would help. I'm on 1103 if that helps.

Yockeren
Level 7
Same here.

I simply think that WoL is the only way to actually wake this machine without physically pressing the power button.
Kinda irritating as i use mine as a console / media machine and it is tugged away under the TV, looking into some kind of raspberry pi - logitech harmony solution but it is expensive and a wake on USB could solve it all very cheaply.