12-23-2017 09:54 PM - last edited on 03-06-2024 11:07 PM by ROGBot
12-25-2017 09:36 AM
12-26-2017 11:23 AM
-ironMAN- wrote:
I installed the new 3008 BIOS update yesterday, I've managed to get my 32GB of G.Skills Trident RGB stable at 3200MHz. Finally! 😄
12-26-2017 03:55 PM
Cara Carcass wrote:
I have the same ram and i was full of joy, jusyt you like you.
SOC to 1.1V - DDR voltage to 1.4V - and just bopot the damn thing.
It worked for 5 Days until i went and visited my parents over christmas.
I disconnected power cable from my psu over christmas.
Cant get it back to work. It simply doenst work.
Highest settings are now 2133. Anything else wont boot anymore.
I cannot save anything in teh bios or the pc wont boot.
Hit the reste button on the back of the pc enter bios with f1 when asked and discard any changes or it wont boot.
Even if i dont change anything and hit save and reboot it will not boot.
Had that before. I hate this board so much! It always works for a few days after bios update and then for no reason breaks after some days.
Whatever you do - do never disconnect the computer from power again.
12-27-2017 06:24 AM
Cara Carcass wrote:
I tested this 4 times now.
If i unplug the power chord for a brief moment, i cannot start my pc at all , with anythign higher than 2133 on the ram.
After flashing the bios with the same 3008 version again, it works like a charm.
4 times in a row, thats not likely a coincidence.....
12-27-2017 09:28 AM
Cara Carcass wrote:
I tested this 4 times now.
If i unplug the power chord for a brief moment, i cannot start my pc at all , with anythign higher than 2133 on the ram.
After flashing the bios with the same 3008 version again, it works like a charm.
4 times in a row, thats not likely a coincidence.....
12-27-2017 10:05 AM
Clouseau wrote:I thought the coin battery lasts years?
The coin battery needs to be replaced .
12-27-2017 01:00 PM
VRBabe81 wrote:
I thought the coin battery lasts years?
12-29-2017 02:58 PM
Clouseau wrote:
The coin battery needs to be replaced .