Help
AMD 500 & 400 Series
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Sign In to Post

Pc boot twice after overclocked

PC boots,turns off after 2 seconds and then turns on automatically againIs this normal? or there is any solution to this.Oc using AI suiteNewbie and still learning how to oc properly Specs:Ryzen 1700 3.88ghzGskill trident z rgb 3200mhz

Manually setting timings in the bios (very, very long post)

EDIT I should point out first I wrote this to try to help people have some information and a method to work from. Sources for info are very convoluted and are diluted with a lot of misinformation. Hopefully this will give people a head start on getti...

syldon by • Level 9
  • 49138 Views
  • 0 replies
  • 0 kudos

Help with W_PUMP conector CH6

Hi guys , so ive just finished my custom wc build and pluged my pump to the W_Pump conector that aparently supplies enough watts to power my pump , i just can find any info on how that conector works. Can i adjust the pump speed ? if so how ? And wil...

RGB extension cables?

Would anyone know where to get a RGB extension cable like the one that is included with the C6H? The only thing I can ever seem to find are all fan extension cables or the occasional 3 way splitter.

PakRatJR by • Level 7
  • 14083 Views
  • 11 replies
  • 0 kudos

Suggestion for Qcode

Hi all,What do you think about turning off Qcode digit after boot sequence?I mean, is useless to have a permanent 24 or 40 code when the PC is working on Windows without issues.Can you add an option for this in the next bios releases?

How to configure correct timings for DDR4 Rams?

Hello,I have GSKILL F4-3200C14D-16GFX which supposed to work with 3200Mhz and CL14 timings.I see that it was working on 2400 Mhz on default. I changed it from Auto to 3200 Mhz. It worked well. But I see that on CPU-Z, my timings were 16-16-16-XX.I go...

chonk by • Level 7
  • 39538 Views
  • 14 replies
  • 0 kudos

Crosshair VI Hero m.2 e-key question

I'm curious about potentially using the E-key M.2 connector meant for the wireless card for something else, however some questions come to mind:- does that connector have dedicated pci-e channels or does using it affect the pci-e 2.0 x1/x4 slots?- if...

Maeslin by • Level 7
  • 1668 Views
  • 0 replies
  • 0 kudos

Another Ram question

Greetings,I'm currently using the G-Skill Tridentz F4-3200c16Q, I am able to boot with just 2 sticks just fine with the 3200 setting using the docp standard and setting the mem freq to 3200 with out the cold boot issues.But my dilemma is that when I ...

Labels
Top Kudoed Authors
View all