Hey all,So I recently rebuilt my PC to the following:Fractal Design Meshify CCrosshair VII Hero (from an ASRock H97 Pro4)Ryzen 2700X (from an i7 4970k)32GB (2x16) TridentZ DDR4 3200MHz C14 RAM (from 32GB 4x8 G.Skill DDR3)EVGA Supernova G3 650W PSUEVG...
Did anyone see that new AMD chipset for Crosshair VII?I was wondering if you were able to install it, because I was trying x times and I still only get error 1603 from AMD.Need to mention that I am running Nvidia RTX2080 in my system Win10 (1809)I kn...
I have been trying to figure this out since we have upgraded to GIG internet. No matter what I do, when I run a speedtest, I am only pulling around 380Mbps DL and 38Mbps UL. The ISP has come out and tested the output of the ethernet ports of the rou...
I had a c6h board and everything was working except for ram slots a1 and b1. So i returned it and got c6h wifi. Now everything is working but the front audio. If i set it on ac97 then it recognises something is plugged in. And even in windows audio s...
TL;DR: I failed to do my due diligence and bought ram that is way too fast for my system to take advantage of, two pairs of F4-3600C15D-16GTZ, AKA 32gb of 3600CL15 Samsung B-Die on four DIMMs. If I overclock my RAM to anything above 3200CL14 Prime95...
Version 18.40.022019/01/15248.79 MBytesAMD Chipset Driver V18.40.02AMD Chipset Driver V18.40.02 for Windows Win10 64bit.Corrupted files will not unzip
Hi everyone, So I am new to this forum, and also in the enthusiast consumer market.So i just build my new PC, and it's running Windows 10 Pro, everything is installed and updated to lastest versions, Drivers, BIOS, and monitoring software (HWiNFO64)...
I just finished building the following:Asus Crosshair VII HeroRyzen 2700XGeForce 1080ti (from previous PC)G.Skill TridentZ 2x16GB 3200MHz 14 latency RAMFractal Meshify C caseAnd it will not display anything at all after boot-up. There is an error cod...
Hi all,I was wondering if the 3D Printed parts listed here on the Crosshair VI Hero Product page are compatible with the Crosshair VII Hero?If yes, I am interested in the M.2 Fan Holder; and would like to know the specs for the screws which must repl...
Hello,Recently I've build a PC with the mother Crosshair Hero VI, Ryzen 7 1700, 16gb Ram Corsair 3200mhz and a GTX 1060, SSd 240gb and HDD 2TB. I've build and configure everything and send to the customer with no problem. The PC took 3 days to arrive...
