cancel
Showing results for 
Search instead for 
Did you mean: 

Zenith II Extreme Alpha not setting my tras.

Zarathustraa
Level 7

I dialed in tRAS = tRCD(RD) + tRTP. (I could use that formula all the way down to 23 without issue.) tRCD is set to 15, and tRTP is set to 5. When I dialed in a tRAS or 20 the board sets it to 21. In the bios menu it's set to 20, but always shows 21 in bios and Ryzen Master. 

 I tried clearing cmos with the clear cmos button. Nothing changed from that. 

I'm on bios 1802. Is this a bug? Is there a workaround in the AMD overclocking menus? The values selectable there use a different numerical system. Which value would correspond to 20?

115 Views
0 REPLIES 0