cancel
Showing results for 
Search instead for 
Did you mean: 

DIMM.2 Riser Card LEDs Not Working

TritonB7
Level 7
Currently using Zenth Extreme mobo with the DIMM.2 riser card for two Samsung 960 Pro's in RAID0. I've seen images of the card online where people are using the LEDs on the card to match that of their motherboard LEDs. However, my LEDs on the DIMM.2 riser card are not on at all and the Asus Aura software does not see it. Anyone else have any thoughts as to how to utilize the LEDs on the riser card?
563 Views
7 REPLIES 7

Menthol
Level 14
There may be 2 pin jumpers on the DIMM.2 card to enable/disable LED's

Do you know if the jumpers are set to disable the LED by default?

Menthol
Level 14
I don't remember but with the jumpers in the position like in this photo the lights are on

71721

Thanks for the photo. Yeah, my jumpers are in the same position, no luck so far. I'll try reseating it tomorrow.

gupsterg
Level 13
Read from here and take note of this post.
Intel Defector :eek: AMD Rebel


R9 5900X - Custom WC - ASUS Crosshair VII Hero WiFi - Ballistix Sport LT 2x16GB 3800MHz C16 - RX 6800 XT - WD SN770 2TB - 2x 870 EVO 4TB


24/7 OC: i5 4690K @ 4.9GHz CPU@1.255v 4.4GHz Cache@1.10v - Archon SB-E X2 - Asus Maximus VII Ranger
Sapphire Fury X (1145/545 ~17.7K GS 3DM FS)

:eek: CPU Validation 5.198GHz@1.314v with 4.4GHz cache + RAM 2400MHz@1T :eek:
Da Music video

Thanks for providing the link/info. Looks like the RGB LEDs do not work on the Dimm.2 for the Zenith Extreme.

gupsterg
Level 13
No problem, is a shame when all of it can be like disco stu! 😉 .
Intel Defector :eek: AMD Rebel


R9 5900X - Custom WC - ASUS Crosshair VII Hero WiFi - Ballistix Sport LT 2x16GB 3800MHz C16 - RX 6800 XT - WD SN770 2TB - 2x 870 EVO 4TB


24/7 OC: i5 4690K @ 4.9GHz CPU@1.255v 4.4GHz Cache@1.10v - Archon SB-E X2 - Asus Maximus VII Ranger
Sapphire Fury X (1145/545 ~17.7K GS 3DM FS)

:eek: CPU Validation 5.198GHz@1.314v with 4.4GHz cache + RAM 2400MHz@1T :eek:
Da Music video