DIMM.2 Riser Card LEDs Not Working

[TritonB7]

Currently using Zenth Extreme mobo with the DIMM.2 riser card for two Samsung 960 Pro's in RAID0. I've seen images of the card online where people are using the LEDs on the card to match that of their motherboard LEDs. However, my LEDs on the DIMM.2 riser card are not on at all and the Asus Aura software does not see it. Anyone else have any thoughts as to how to utilize the LEDs on the riser card?

[Menthol]

There may be 2 pin jumpers on the DIMM.2 card to enable/disable LED's

[TritonB7]

Do you know if the jumpers are set to disable the LED by default?

[Menthol]

I don't remember but with the jumpers in the position like in this photo the lights are on

[TritonB7]

Thanks for the photo. Yeah, my jumpers are in the same position, no luck so far. I'll try reseating it tomorrow.

[gupsterg]

Read from here and take note of this post.

[TritonB7]

Thanks for providing the link/info. Looks like the RGB LEDs do not work on the Dimm.2 for the Zenith Extreme.

[gupsterg]

No problem, is a shame when all of it can be like disco stu! 😉 .