- last edited on by
ROGBot
Purchased from Aliexpress, on visual inspection seems like was worth the wait coming from far east 😄 . This should be an improvement over the EK-Supremacy EVO Threadripper Edition.
RGB is not my cup of time but the store that had the best price sold the product with Bykski RGB/AURA . So loose in parcel was Bykski RGB unit, it has 6 connectors, 3 per long side of unit, each with 6 pins, labelled as fan 1 to 6. One short side has 2 connectors with 4 pins labelled as RGB. Other short side has DC 12V 2 pin to molex with pass through, 5 pin labelled as IBM, which has 3 wires to a LED in metal casing :confused: . No manual in box and no idea on usage, nor was there a plan to use it TBH 😛 .
Bykski A-Ryzen-ThV2-X has a nice weight and good finish IMO :cool:. This V2 edition also supports AM3/AM4 as well as Threadripper, read and weep EK 😛 . 3 sides are clear and one long length has an integrated LED unit, this has 4 pin connector and 50cm of cable. There seems to be an 4 pin extension cable included or maybe part of Bykski RGB unit :confused: . Cold plate has a fine machined finish, I may lap it at some point, doesn't seem too shabby at all. Looking forward to plumbing this in 😄 and comparing to EK :rolleyes: .
RGB is not my cup of time but the store that had the best price sold the product with Bykski RGB/AURA . So loose in parcel was Bykski RGB unit, it has 6 connectors, 3 per long side of unit, each with 6 pins, labelled as fan 1 to 6. One short side has 2 connectors with 4 pins labelled as RGB. Other short side has DC 12V 2 pin to molex with pass through, 5 pin labelled as IBM, which has 3 wires to a LED in metal casing :confused: . No manual in box and no idea on usage, nor was there a plan to use it TBH 😛 .
Bykski A-Ryzen-ThV2-X has a nice weight and good finish IMO :cool:. This V2 edition also supports AM3/AM4 as well as Threadripper, read and weep EK 😛 . 3 sides are clear and one long length has an integrated LED unit, this has 4 pin connector and 50cm of cable. There seems to be an 4 pin extension cable included or maybe part of Bykski RGB unit :confused: . Cold plate has a fine machined finish, I may lap it at some point, doesn't seem too shabby at all. Looking forward to plumbing this in 😄 and comparing to EK :rolleyes: .
Hmmm...I guess it's near as dammit though full coverage has to be the target...I saw the Heatkiller solid copper block today...I like it!
LOL...the design!
EK Engineering..."What can we do...we got to get it right the third time... right?"
EK Marketing..."I know, lets make that really complicated design then at least it'll look like we tried"
KISS means keep it spectacularly supercomplicated... apparently
EK Engineering..."What can we do...we got to get it right the third time... right?"
EK Marketing..."I know, lets make that really complicated design then at least it'll look like we tried"
KISS means keep it spectacularly supercomplicated... apparently
Meh...competing on bling instead of temps is hardly doing it for me...
And I can't get past the name...sounds like what this dude rides...
😮
And I can't get past the name...sounds like what this dude rides...
😮
