Zenith Extreme & X399-E

Corsair CMK64GX4M4B3333C16 BIOS Memory Settings

Hi All,I have 64GB of Corsair CMK64GX4M4B3333C16 and noticed last night that it was running at 2133MHz. I've had a read around the forums before I signed up this morning to see how to go about doing this in the BIOS. Most threads I came across menti...

No Boot Post Code 00

Hi Everyone, So this morning I woke up to my Threadripper build not wanting to Post. It has been working fine over the last few weeks without any major issues. I have had some memory issues when trying to boot, but I would just go into BIOS and resta...

POST and boot to secondary graphics card?

Hi,In my primary graphics slot is a Vega & in the other 16x slot is a little Nvidia. The Vega is intended for a virtual machine & VGA passthrough only, so is not the primary card.On a previous motherboard, there was an option to select primary graphi...

NZXT 700i fit

Hi all,has somebody tried to install the Zenith Extreme into the NZXT 700i Case? Will it fit? Maybe someopne can post some pictures with the fitting.Thx

Back i/o panel USB port oddity/issues (earlier solder question linked perhaps)

All began about 10 days ago when my keyboards led's stopped working on wasd zone (g710+) had it connected to the 2 second lowest (not 3.1/Qcharge) USB ports. I figured the keyboard might have gone bad, warranty had just expired, but I figured I m...

Rog ext

What can I plug in the ROG EXT port on the Motherboard? I mean that I am aware that an external display device to go on the case. What does ASUS have to even work with it?Been going through ASUS website and its difficult to actually find anything tha...

IOMMU not showing devices in 0000:40 UEFI 0701

Hi all,Please see my comments here, where I've linked to my gisthttps://forum.level1techs.com/t/asus-rog-zenith-extreme-x399-threadripper-iommu-details/121122/7-+-[0000:40]-+-00.0 Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Root C...

Cannot Get Raid To Work

My NVME 960 Pro 1TB in Raid 0 wont show up as a raid when i go to install windows 10 not even my regular drive wont show up.I have 2 Sandisk Ultra 2 500GB Raid 0 and 2 8TB Ironwolf PROs In raid 0My NVME settings for raid are setup currectly and enabl...

My zenith can't POST

Hello, Is there someone who knows what's going on my rig?*symptom*- the rig retries boot showing "code: C0 detect memory" on OLED panel.*- After code:C0 happens, "CPU" is shown *in an instant, rig shuts down and turns on.parts what I use*- X399 zenit...

I'm already done with this garbage mobo

Brand new 1950x on Zenith Extreme build.I can't get a initial boot to go all the way. I've pull and reseated all ram and now have just one stick in A1 (it's GSKill's 128GB kit with the "X" model number--i.e., slated for Threadripper.I've flashed BIOS...

Forum Posts