Zenith Extreme & X399-E
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Help! Screw #1 will not thread no matter what I do

I have a brand new 1950X and Asus Zenith Extreme motherboard and screw #1 just won't thread. Has anyone else seen this? It seems like the torx screw is just too short with the tray installed.Here is the processor installed. I've opened up an Asus cas...

pisymbol by Level 7
  • 16744 Views
  • 33 replies
  • 0 kudos

Updated Software found elseware

So was browsing and went to the "asus software" forum. Noticed AI Suite 3.0blahblah(Link was to a maximus board) and for us the link on the software/drivers is for AI Suite 2.0blahblah.The 2.0 runs like absolute poo on Win10 Fall update, takes for ...

Error on Post Code 55

I built my X399 rig in August and it has been working perfectly, I just moved the internals to a new case and when I powered everything up to test I got a post code of 55. I contacted ASUS and they tell me that this post error is related to memory. ...

logitech brio 4k and 1080p

i bought some logitech brio webcam back in june to work on my old mobo (maximus extrem V), its the only webcam on market that can hit 60 fps in 1080pfirst thing first i use 3 screen on my setup and my pc is far away from me so i use usb extension cor...

69068

Corsair CMK64GX4M4B3333C16 BIOS Memory Settings

Hi All,I have 64GB of Corsair CMK64GX4M4B3333C16 and noticed last night that it was running at 2133MHz. I've had a read around the forums before I signed up this morning to see how to go about doing this in the BIOS. Most threads I came across menti...

No Boot Post Code 00

Hi Everyone, So this morning I woke up to my Threadripper build not wanting to Post. It has been working fine over the last few weeks without any major issues. I have had some memory issues when trying to boot, but I would just go into BIOS and resta...

POST and boot to secondary graphics card?

Hi,In my primary graphics slot is a Vega & in the other 16x slot is a little Nvidia. The Vega is intended for a virtual machine & VGA passthrough only, so is not the primary card.On a previous motherboard, there was an option to select primary graphi...

hexag by Level 7
  • 2300 Views
  • 1 replies
  • 0 kudos

NZXT 700i fit

Hi all,has somebody tried to install the Zenith Extreme into the NZXT 700i Case? Will it fit? Maybe someopne can post some pictures with the fitting.Thx

Follo by Level 8
  • 1839 Views
  • 0 replies
  • 0 kudos

Rog ext

What can I plug in the ROG EXT port on the Motherboard? I mean that I am aware that an external display device to go on the case. What does ASUS have to even work with it?Been going through ASUS website and its difficult to actually find anything tha...