Hello,I got problem with asus prime X399 and Samsung 960 EVO 1000GB that are very slow. And all computer on windows 10 seems to be very slow.the cpu is a RYZEN 1950X with 32gb. Th GPU is a GTX 1080Bios version is the last 0403please helpthank you
Computer Type: CustomGPU: 2 X EVGA - GeForce GTX 1080 Ti 11GB SC2 (SLI)CPU: Threadripper 1950X, StockMotherboard: ASUS ROG ZENITH EXTREME X399 TR4RAM: G.SKILL TridentZ RGB Series 32GB (4 x 8GB) 288-Pin DDR4 SDRAM DDR4 3200 - Running at 2933 currently...
I'm using bios 0801 All drivers are updated I'm using Roccat ryos mk fx keyboard and Corsair ScimitarEvery so often when I start my pc one of them is not working and the Pc Doesn't recognize it I have to replug for it to work again is there any reaso...
See attached picture.The picture really doesn't do it justice, but the right side is pretty dark. Almost like a LED is dead maybe? or is the darkness normal?
Going to be building a Zenith Extreme Threadripper build soon, had some questions:1) Does any Corsair RAM run at 64GB (4x16GB) @ 3200MHz using the last stable bios (0701)? It seems like post-launch anything above 32GB or near 3200MHz, people had majo...
I seem to be having a bad time with speeds maxing at 1700 read and write and when i checked Samsung magician it showed PCIe Gen 3 x 2.According the manual the DiMM.2 card shares bandwidth with the U.2 port next to the sata's.I've checked bios a numb...
Hey moderators, can you create a forum for the new ROG X399-E Strix users please?
Issue fix.
hie to all, i have a m.2 960 pro 2 tb, and my speed with is suckmy q32T1 in crystal mark is around 160 when any review of this sdd push it to 2000...what the hell ?also i can't seem to put in bios the pci from x4 to x8, i dont use any u2 port so i do...
So I purchased an ASUS X399 Zenith board and have 6x Samsung SSD 850 Pro that I want to setup as RAID 0. The board is upgraded with the latest firmware and it does recognize all the hard drives when set in ACHI mode:https://i.imgur.com/GPGip9a.jpghtt...
