Zenith Extreme & X399-E
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

NVMe SSD doesn't show up!

I have 2 Samsung 960 pro 512 GB NVMe SSDs.I installed windows on one of them, and i wanted the other to be as a normal storage drive.But i can't see or access it inside windows (although i can see the drive in Disk Management)How can i use it as a no...

I can't access my DATA

Hi everyone.. ( I MADE A MISTAKE )I was trying to install windows 10 on my M.2 SSD, and there was another HDD hard drive pluged in.And when i got to the step where i had to choose where to install the OS, i choose the M.2 SSD (i'm pretty sure i choos...

DO NOT FLASH: PRIME X399-A BIOS v407

So I updated the BIOS on my PRIME X399-A from v403 to v407 today, but looks like Asus has screwed something up with it as it refuses to boot with memory set any higher then 2133MHz. Even with everything at stock and just the RAM set to 3200MHz using ...

4Strings by Level 10
  • 2335 Views
  • 0 replies
  • 0 kudos

Zenith Extreme - Bluetooth Antenna?

Where is the Bluetooth Antenna for Zenith Extreme board? Is it built into the motherboard or is it one of the 2 antennas that comes with it? If so, which one is it? Motherboard manual lists the antennas as being used for WiFi:1 x ASUS WiGig 802.11...

ApolloX by Level 7
  • 12561 Views
  • 6 replies
  • 0 kudos

ASUS Zenith Extreme low cpu clock

Hello all, This board has been a freaking nightmare; plagued by BIOS issues. After leaving my computer idle my CPU is stuck to ~0.66 Ghrz never going above this. Temperatures are fine and when I restart the computer my speed returns to normal. What t...

Nvme pci card for extra m2 drives

Hello!I bought a Asus strix X399 which has 2 nvme slots.Problem is i don't want to use the vertical mount so I was thinking of using and pci card for extra m2 drives but don't know if I could use the Asus Hyper M2 for that matter.I don't plan to use ...

can't install the the ASUS AI Suite 3

am i the only one ? the setup windows open..something seem to be happening, but after a few second it just close, i succefully installed once but i cant do it anymore, i am only after the fan expert, i configure all my fan into the bios to be quiet, ...

Zenith Extreme wont boot @ 3600

I have F4-3600C16D-16GTZR. DOCP see's it properly and makes the "proper" adjustments...except it will not boot without significant changes and I still have not been able to get it stable in Windows at 3600. If I use the DOCP settings except change it...

Labels
Top Kudoed Authors