Waiting for some parts still to arrive for my new PC, I was looking for the most recent drivers for the MB.What you guys tipically do, when you update those drivers ? Check support page of your MB or you check directly at AMD ?It look like some drive...
I’m doing a build with a Zenith II Extreme. I will be using two M.2 SSDs. C: drive and drive.The Zenith II Extreme has five possible locations for M.2 SSDs: Two slots on the top side of the board under the big heatsink. One slot on the bottom sid...
My system has the following specsZenith Extreme with 1950x Threadripper128Gb Ram8 x Samsung Evo 960 nvme drives in Raid 02 Asus Hyper 16x CardsCurrently I have the 2 Hyper cards full up with all 8 drives, but I have tried various combinations of driv...
Hi, I was just wondering whether there was an ETA on when we would get support for Resizable BAR for the Zenith II Extreme. MSI just recently put up a beta BIOS that has support for resizable BAR for their sTRX40 boards.Would be great to have since n...
Hey guys,I recently noticed that my 3960x isn't clocking down below the spec when unused / lightly used.No OC on MB (Non-Alpha Zenith II).What would be the correct setting for it to clock down when possible?Perhaps enabling the D.O.C.P profile change...
Recently updated to newest BIOS my Zenith Extreme II working with AMD Threadripper X3970. System if horribly unstable. No overclocking, just defaults bios settings. It's going to sleep by itself suddenly and I have to restart it many times a day beca...
Any advice is appreciated. I'm using 2x Samsung NVME 980 Pro 500GB drives in M.2 ports. (1.) Specifically M.2_1 & M.2_2 defined in the BIOS as GEN 4. (2.) BIOS defined Raid-1 is being used as boot drives under Windows 10 Pro. Everything works, but ...
Hi, I have a Zenith II Extreme (non Alpha) with a 3960X CPU. My issue is that the PC, from power on or reboot from within Windows, will get to the point at which the first BIOS messages appear - or before, and then reboots itself. This happens 5-10 t...
Hey Guys,Just finished setting up my build and very happy with how things turned out. Just concerned about the temperature of the 3970X. I am running a custom loop with an EKWB monoblock. 2x360 Rads ( PE & XE). The GPU isn't under water yet as I want...
At the moment I have Zenith Extreme, 2990WX and 4 x 8GB RAM from G.Skill (3200MHz CAS 14). These https://www.newegg.com/g-skill-16gb-288-pin-ddr4-sdram/p/N82E16820232530?Item=N82E16820232530&nm_mc=TEMC-RMA-Approvel&cm_mmc=TEMC-RMA-Approvel-_-Content-...
