Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
30,154 Views
85 REPLIES 85

RobertoSampaio
Level 8
In response to RobertoSampaio

‎11-28-2020 01:55 PM

Version 1002 Beta Version
2020/11/27

What is new ? Change log?
0 Kudos

dbavatar
Level 7
In response to RobertoSampaio

‎12-19-2020 12:45 PM

RobertoSampaio wrote:
Version 1002 Beta Version
2020/11/27

What is new ? Change log?


That's the resizeable BAR BIOS, but there seem to be many undocumented changes between these BIOS's. For example my ram kit didn't work before 901. Also side note, anyone else notice on these bios's that their RAM runs about 10% faster across the board when "MRC fast boot" is set to disabled? Takes 2 minutes to reboot, but worth it. Seems like a bug, no? Seems like there are hidden memory training parameters that don't get saved and used in "Auto" mode. Perhaps @Shamino will notice.
0 Kudos

Lotzi
Level 7

‎12-04-2020 04:47 AM

Hey Shamino

What comes next after Bios 1002 for Z490-E Gaming?

Regards
0 Kudos

RobertoSampaio
Level 8
In response to Lotzi

‎12-04-2020 08:00 PM

Hi Shamino,

How could I test the BAR in the new 1002 BIOS?

Tx.
0 Kudos

Shamino
Moderator

‎12-18-2020 10:13 AM

Flow Chart to visualize the decision-making process of the processor for Voltage and Frequency. Obviously the evaluation is continuously looping and the V and F flows are intertwined, ie you can imagine the Frequency flow continues into the voltage flow. Not exactly so, but close enough for comprehension.

https://photos.app.goo.gl/3fk3fApkoBXY8m376

https://photos.app.goo.gl/38MVAqL8yp3J7mLz7

https://photos.app.goo.gl/jm82EpZwkTVhwE2V6
0 Kudos

RobertoSampaio
Level 8
In response to Shamino

‎12-18-2020 10:33 AM

Shamino wrote:
Flow Chart to visualize the decision-making process of the processor for Voltage and Frequency. Obviously the evaluation is continuously looping and the V and F flows are intertwined, ie you can imagine the Frequency flow continues into the voltage flow. Not exactly so, but close enough for comprehension.

https://photos.app.goo.gl/vnkjZfUF7c3pYfwp7

https://photos.app.goo.gl/6h3h2t2z4mYAwzhu7

https://photos.app.goo.gl/jm82EpZwkTVhwE2V6


Hi Shamino,

I'm running
53x3, 52x5, 51x8, 50x10
+2Boost_OCTVB
SVID=trained
LLC=4
Adaptive = 1.460v
Ring down bin = Enable
Max=47
Min=AUTO

So, can I set ring to 49 and the logic will down the ring multiplier automatically if voltage is low?



tx
0 Kudos

Shamino
Moderator

‎12-18-2020 10:34 AM

it should already do this by what i see in ur setting
0 Kudos

RobertoSampaio
Level 8
In response to Shamino

‎12-18-2020 10:51 AM

Shamino wrote:
it should already do this by what i see in ur setting


I changed MAX ring to 48x and start testing...

By the way, MAX STRESS is causing problems to my system.
I understand MAX STRESS limit VID to 1.500v, correct?
If I enable it, i don't have VID>1.499, but I experience freezing...
0 Kudos

Shamino
Moderator
In response to RobertoSampaio

‎12-18-2020 10:56 AM

RobertoSampaio wrote:
I changed MAX ring to 48x and start testing...

By the way, MAX STRESS is causing problems to my system.
I understand MAX STRESS limit VID to 1.500v, correct?
If I enable it, i don't have VID>1.499, but I experience freezing...


it is not a fixed limit, it depends on load as well.
my guess is that it clips frequency at times to a frequency point you have not validated much at, and the resultant vid at that point may be too low.
0 Kudos

RobertoSampaio
Level 8
In response to Shamino

‎12-18-2020 11:42 AM

Shamino wrote:
It is not a fixed limit, it depends on load as well.
my guess is that it clips frequency at times to a frequency point you have not validated much at, and the resultant vid at that point may be too low.


If I let "VMAX STRESS = AUTO" is it enabled? I think the default "AUTO" is disabled . Am I right?

By the way Ring 48x is fine with +2Boost_OCTVB. 49x crashed.
0 Kudos