06-09-2020 02:46 AM
06-16-2020 07:07 PM
07-02-2020 01:40 AM
The file will look like this when you open it when back in WIndows.
*DRAM WRITE to READ Delay 
DRAM WRITE to READ Delay L 
DRAM WRITE to READ Delay S 
06-16-2020 07:12 PM
No the disk check came after i did a Microsoft update lol . i have it turned off now.
If it was boot instability it would let me know in POST and it would not go any further. I really think its the GFX card , because the spindle loading i think it is trying to find the gfx driver before logging in. As you saw in the video it does then pick it up after i login.
Ill try ur suggestions once i get back from work. Ill try to take pictures of a lot of the tabs.. What are the main things to check .. I have built a few pcs and i have never had to change bios settings after i installed a pc. my bios is 607
When in the bios with a USB formatted to FAT 32 go to Tool, Load/Save Profile, CTR+F2
Can you explain how to do this .
06-16-2020 08:59 PM
06-17-2020 01:01 PM
I see I left out a step for saving the bios settings. When in the bios with a USB formatted to FAT 32 go to Tool, User Profile, Load/Save Profile and then CTR+F2.
I would post screen shots but for some reason it says my files are too large and if I edit them down they are tiny and hard to read. I obviously do not post online much 😉
How do you go about posting your screen shots?
06-17-2020 05:39 PM
yes so originally this issue was present when i had no overclocking. I can run the pc full functionally , it runs fine , and in games its a monster. So i wanted to do Optimized Overclocking and i enabled XMP in bios. Its the whole purpose of why i chose this motherboard for the overclocking capabilities . Yes it configured my ram to 4500mhz and 1.45V. When geting to post it booted with no issues and ive been using it for a week with no problems.
New issue arised where i was trying to save the bios profile and my flash drive doesnt work. When logged in and in device manager in USB bus controller i have unknown usb device descriptor failed . Tried running troubleshooting hardware and device , didnt work, tried uninstalling/reinstalling didnt work. LOL
Where do i find the MRC fast boot and MCH ?
06-17-2020 05:52 PM
06-18-2020 02:47 AM
Extreme Tweaker Tab, down to Dram Timing Tab, then scroll down to find them. Bios also has search at the top or F9 to find items.
The board has dual bios, have you tried the other bios?
It seems like bios 062 is the best one so far(as in RAM OC stability). But none have given me any kind of boot issue like you have. Maybe try another clean install of Windows 2004? Or reinstall GPU drivers?
The reason I thought it was with the RAM training is I have had issues like that when OCing the ram and it not being stable. But you said you can game and it is fine so the RAM stability might not be your issue.
06-18-2020 12:26 PM
Lol windows 2004 are you serious >?
What kind of ram do you have . I have 16gb 8x2 4500mhz TeamGroup
sometimes it depends on the ram ..
Ive reinstalled windows and gpu drivers already ..
06-18-2020 12:32 PM