WIndows 10 Stuck In DOS Like screen for 1 Min then boot into windows

[nitinvaid20]

Hello all of sudden dont know what happened my be bios update? for my board see this
after boot logo the windows is now stuck here for like minute in dos like screen please check the video what can be done to solve this even i have formatted the windows and resinstalled

I have SSD M.2 NVME 970 EVO and rest of my system specification are in my signature

and one more thing can i degrade my bios?
if that can be issue

https://www.youtube.com/watch?v=2KfNVlBqXT8

[nitinvaid20]

I tried degrading the bios to 805 getting error

[Phillyflyer]

nitinvaid20 wrote:
I tried degrading the bios to 805 getting error

You can downgrade the bios using the Bios Flashback method with a USB...I don't believe you can revert to a previous bios using the EZ Update via internet.

[nitinvaid20]

Phillyflyer wrote:
You can downgrade the bios using the Bios Flashback method with a USB...I don't believe you can revert to a previous bios using the EZ Update via internet.

I have tried in bios too via EZ flash 3
there also i am getting the error something like invalid file

[Phillyflyer]

nitinvaid20 wrote:
I have tried in bios too via EZ flash 3
there also i am getting the error something like invalid file

Have you renamed the bios file ?

[nitinvaid20]

Phillyflyer wrote:
Have you renamed the bios file ?

tried that too

[NemesisChild]

nitinvaid20 wrote:
I have tried in bios too via EZ flash 3
there also i am getting the error something like invalid file

You have to use the bios flash back method to revert to an older bios.

[nitinvaid20]

NemesisChild wrote:
You have to use the bios flash back method to revert to an older bios.

i think i had that in my previous RAMPAGE VII board
and its only avaliable in maximus boards so i dont think there is any way for me to get back to previos bios....:o

[Phillyflyer]

nitinvaid20 wrote:
i think i had that in my previous RAMPAGE VII board
and its only avaliable in maximus boards so i dont think there is any way for me to get back to previos bios....:o

Looking at the specs for the board...looks like your correct...don't see it either....not to worry....download and extract bios 805 to a USB...make sure drive is FAT32 formatted....rename the bios file as a cap file ...then boot back into the bios EZ 3 update utility....and choose storage as method to update....pick the drive that the bios is stored on and look for the bios file that has been renamed .... as a .CAP....you should get the message to read the file...pick yes...then it should update

[nitinvaid20]

Phillyflyer wrote:
Looking at the specs for the board...looks like your correct...don't see it either....not to worry....download and extract bios 805 to a USB...make sure drive is FAT32 formatted....rename the bios file as a cap file ...then boot back into the bios EZ 3 update utility....and choose storage as method to update....pick the drive that the bios is stored on and look for the bios file that has been renamed .... as a .CAP....you should get the message to read the file...pick yes...then it should update

1st thanks for replying really
when i reach my home ill check this for sure but tell me the extension is *.cap what should be the name? cap? like "cap.cap"