08-28-2018
11:16 PM
- last edited on
03-06-2024
07:50 PM
by
ROGBot
08-30-2018 05:44 PM
Christo_M wrote:
Note: Embarrassing but I got confused, this is actually on my PRIME-A Z370 board. I might try populating both slots on the Strix later to see if the same issue occurs.
I think this might be a bug on the motherboard.
I have a few 2.5” SATA SSD drives connected via traditional sata ports, and one nvme Toshiba XG3 512gb connected to the bottom most nvme slot. HDD activity led working as expected.
I recently purchased a 1TB nvme Samsung PM961 and installed it to the top nvme slot. Now the led is constantly on although it does still flash with activity when any drive including the new one is accessed. The drive itself is performing as expected.
Has anyone else experienced this issue?
I have tried flashing to the newest bios and updating drivers, trying both x2 and x4 modes and a whole lot of other bios settings with no changes.
Regards
Christo
11-08-2018 10:40 PM