cancel
Showing results for 
Search instead for 
Did you mean: 

ROG STRIX Z370-E - No RGB LEDs

madsushi
Level 7
Howdy!

I have been having an issue with the RGB lights/controller on my Z370-E since the first time I turned it on. The on-board/shield RGB lights have never turned on,
here it was at first boot:

68317

In addition, the strips I connect to the normal RGB headers just go through their default cycle, nothing else.

When running any version of the Aura software (including latest 1.05.22), there is no "Motherboard" option, only DRAM and ADD STRIP. The DRAM controls actually do control my G.Skill RGB RAM, but I can't control the motherboard RGB lights nor the regular strips (not the addressable strips).

68318

Anyone else run into this issue? I saw some posts on other product lines about flashing the C6H firmware but I wanted to check in here first and see if anyone had seen this. I tried flashing new BIOS versions (including 0419 and later 5419) and clearing CMOS (battery out + jumper cleared). No luck so far. I have a support ticket open but wanted to ask here too.
950 Views
29 REPLIES 29

Hi all,

hate to bring this thread back to life but I run into a similar issue but not as simple.
My LED turns on when pc is in sleep mode or shut down. Once it awakens or turns on, the LED goes out. In BIOS I have it set to always be on and not sure why it is not working.

I will check connection behind the shield once I get home and update the thread.

Thanks

esquivelchris89 wrote:
Hi all,

hate to bring this thread back to life but I run into a similar issue but not as simple.
My LED turns on when pc is in sleep mode or shut down. Once it awakens or turns on, the LED goes out. In BIOS I have it set to always be on and not sure why it is not working.

I will check connection behind the shield once I get home and update the thread.

Thanks


So I got home, took everything apart, checked connections.. All was connected correctly.
Not sure why this is happening.
I just want my LED to turn on and sync up with all of my other lights.

This is very frustrating

I have something similar going on, I am wondering if could be the same thing.

I didn't even know I had a light under the Shroud,maybe it was working but it is not working now.

Also for the Last month or so my CoolerMaster RGB liquid cooler is not lighting up either.

I am wondering if this is the same issue in one as both lights and Cooler (which is plugged into the MotherBoard AO Pump) is not working

thanks!

Carbonicdk
Level 8
Well, since 1703 is the creators update and 1709 is the fall creators update I guess that might explain it. Can't get Aura to worth properly with both the motherboard built in LED and external LED lightning.

Hi,

Can you maybe share your bios version?


I got this motherboard just a few days ago and had to update my BIOS (0518) to work with gskill 3866 RAM and right after booting into windows I noticed my motherboard IO shield LED stopped working.

So I found your thread and re-connected the RGB strip under the IO shield, inserted the ATX 24 pin, switched on the PSU - boom - the RGB strip switched.
Celebrated too soon, as soon as I connected my gpu 1080ti strix the LED went out but the LED on the gpu switched on. After connecting the CPU 8 pin power the RGB strip came back for a few seconds before completely switching off / dying.

Downgrading the bios to 0428 didn't solve the problem, also the BIOS doesn't show a controller present at EC1.

Windows 10 build 1709.

IraHayes wrote:
Hi,

Can you maybe share your bios version?


I got this motherboard just a few days ago and had to update my BIOS (0518) to work with gskill 3866 RAM and right after booting into windows I noticed my motherboard IO shield LED stopped working.

So I found your thread and re-connected the RGB strip under the IO shield, inserted the ATX 24 pin, switched on the PSU - boom - the RGB strip switched.
Celebrated too soon, as soon as I connected my gpu 1080ti strix the LED went out but the LED on the gpu switched on. After connecting the CPU 8 pin power the RGB strip came back for a few seconds before completely switching off / dying.

Downgrading the bios to 0428 didn't solve the problem, also the BIOS doesn't show a controller present at EC1.

Windows 10 build 1709.


BIOS version should be in the screenshots (0612)

dgeigerd
Level 7
madsushi wrote:
Howdy!

I have been having an issue with the RGB lights/controller on my Z370-E since the first time I turned it on. The on-board/shield RGB lights have never turned on,
here it was at first boot:

68317

In addition, the strips I connect to the normal RGB headers just go through their default cycle, nothing else.

When running any version of the Aura software (including latest 1.05.22), there is no "Motherboard" option, only DRAM and ADD STRIP. The DRAM controls actually do control my G.Skill RGB RAM, but I can't control the motherboard RGB lights nor the regular strips (not the addressable strips).

68318

Anyone else run into this issue? I saw some posts on other product lines about flashing the C6H firmware but I wanted to check in here first and see if anyone had seen this. I tried flashing new BIOS versions (including 0419 and later 5419) and clearing CMOS (battery out + jumper cleared). No luck so far. I have a support ticket open but wanted to ask here too.
I have the EXACT same Issue. Strix Z370-E Motherboard, in aura only dram and add header showing, also tried cmos reset, my rgb stripes and mobo stripe were rainbow mode but after a few days the mobo rgb didnt turn on anymore and the rgb strips were only white. I've also tried other asus aura versions but it didnt changed. In bios there is btw a LED EC2-Version but no LED EC-Version showing.

Gesendet von meinem ONEPLUS A3003 mit Tapatalk

I'm running on 0428 bios with the default rainbow effects and the latest AURA doesn't even launch on this bios. BIOS 0528 would launch aura but without the mobo, LED strip and the strip would get stuck on white.

This motherboard support is a disaster, I feel like a beta tester.

Wr3cklessAnt1cs
Level 7
This worked for me. The lights would come on at first boot, they were on while the system was off as well. I removed the shroud, and to my surprise the connection was loose. Tightened it back up, and BAM. Everything works great. AURA recognizes my mobo lights, and I can sync them with my strips and RAM.

Thanks for the help, guys. Glad I found this thread! 🙂
ASUS ROG Strix X370-F
AMD Ryzen 5 1600
DEEPCOOL Captain EX 240
16GB G.Skill TridentZ RGB RAM
EVGA GeForce GTX 1080 FTW 8GB
Corsair CX650M PSU
HP 120GB SSD
4TB WesternDigital HDD

I need help my z370e motherboards led stopped working suddenly ,I removed the cable under the led on motherboard and replugged it still nothing....
I even installed latest bios windows and aura software but nothing happened help!!!!!!!