06-07-2018 05:43 PM - last edited 3 weeks ago by ROGBot
06-07-2018 08:15 PM
SherardG wrote:
Finally, ASUS decided to release an AIO solution, and not just any generic one at that. Something that could do well with our missing VRM temp sensors, and something that goes well overall, aesthetically speaking.
I am just worried about one thing: Pump/fan clearance. Although the product is up @ global site [https://www.asus.com/Cooling/ROG-RYUJIN-360/overview/] no specific specs are quoted. I hope that this was created putting the poor clearance of the AIO to DIMM slots in mind, specially given the fact that the run of the mill NZXT pump's elbow joints would bend my RAM Modules when oriented in the proper way. Based on the pictures released, the pump has its elbows going the same way (right) when oriented properly.
Anyone from ASUS care to advise? Maybe also address the missing VRM sensors as well...
Edit: Looks like gen4 pump but since it routes behind the front "face" of the pump, could you also clarify if it is a gen4 or gen5?
06-08-2018 09:30 AM
NemesisChild wrote:
Your link seems to be broken.