Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

RAM vdroop

SightUp1
Level 7

‎11-26-2017 01:53 PM - last edited on ‎03-05-2024 09:41 PM by Community Admin

If it matters, I have a z370-F with a 8700k.

In my BIOS I have my RAM voltage set to 1.35. For some reason it sets it to 1.3530 but that's another issue. But when it's set to 1.35 in the BIOS, upon restarting, it droops to 1.31-32. What should I do? Leave it alone? Should I set it to 1.37 So it actually shows 1.35 in the BIOS?
Labels:
0 Kudos
651 Views
6 REPLIES 6

morph_
Level 11

‎11-26-2017 04:26 PM

Are you having ram stability issue, posting or booting?

If your ram can run with less voltage than the specified that is a good thing, means everything is running more optimally and cooler!
0 Kudos

SightUp1
Level 7
In response to morph_

‎11-26-2017 04:30 PM

During loads mostly.
0 Kudos

morph_
Level 11

‎11-26-2017 06:32 PM

so no stability issues (Crashing/ bsod's etc)...?

Just voltage droop?
0 Kudos

JustinThyme
Level 13

‎12-01-2017 06:12 AM

SightUp1 wrote:
If it matters, I have a z370-F with a 8700k.

In my BIOS I have my RAM voltage set to 1.35. For some reason it sets it to 1.3530 but that's another issue. But when it's set to 1.35 in the BIOS, upon restarting, it droops to 1.31-32. What should I do? Leave it alone? Should I set it to 1.37 So it actually shows 1.35 in the BIOS?


Once you are booted into the OS whats it showing?
Are you having any stability issues?



“Two things are infinite: the universe and human stupidity, I'm not sure about the former” ~ Albert Einstein
0 Kudos

Silent_Scone
Super Moderator

‎12-01-2017 06:30 AM

Wouldn't concern yourself with this, at all. Software isn't going to tell you anything worth knowing. To know exactly what's happening you'd need to measure at the socket or on the DIMM itself. If the memory is stable, then that's all that is needed.
9800X3D / 6400 CAS32 / ROG X870 Crosshair / TUF RTX 4090
0 Kudos

Praz
Level 13

‎12-01-2017 06:32 AM

Hello

RAM voltage VDROOP for the majority of usage can be considered non-existent for consumer class motherboards. The actual amount is so low that noise and other anomalies will mask the actual droop unless considerable effort is expended during the measurement process. If the problem being experienced is a difference of voltage between what is set and the actual value physical measurements are required as software is not an accurate indicator. When making the measurement ensure the equipment being used has the necessary resolution to accurately display the difference being seen. Also the proper connection of the probes are necessary to eliminate trace and plane impedance induced errors.
0 Kudos