12-24-2020 05:11 AM
02-27-2021 08:24 AM
Since Updating my MB to 1802 i can boot with XMP 2 profile but the my pc needs now longer to start into the Post screen (rog logo), Displays stays dark for 1-2 min until the board go through all checks (hdd check, mem check etc..) after all tests it starts normal....*
Anyone has the same issue?*
03-07-2021 12:50 PM
03-08-2021 06:32 AM
noticed long post times after reset and getting bios safe mode message randomly which is usualy if i reset right after a boot after having windows load a bit for about 3 min. If the computer is on awhile though Normally i notcied my CPU DRAM lights will cycle 2 sometimes 3 times before posting and then booting normally. XMP off my post time is alot quicker.
Heres a video of a typical boot for me after restarting. No errors or issues after posting on this video
03-08-2021 07:30 AM
That is a RAM compatibility/Training test. Mine usually does this when I first turn on my PC, When I push the reset button, or if the PSU loses power. For me it's quicker if I reboot my PC from within Windows.
03-08-2021 03:10 PM
im not talking about cold boot where i shut off the psu completly or first enable xmp when the power goes off completely for a second and back on , This is a regular windows reset where i noticed the cpu light goes on then dram and then back to cpu and back to dram. It doesnt do it with xmp off so im guessing its the training like you said. Just after noticing the bios going into safe mode randomly " if i reset the pc about 2-3 times" im just noticing it now. Majority of my start ups and reboots though are fine
The safe mode issue is odd though. If i leave my pc on for awhile or at least about say longer than 5-10 min i can reset / shut down no issue. if i do it about 2-3min after logging on "specifically right after i notice the XTU service start in the event viewer" then i can reproduce it. Ill see the cpu and dram go back anf forth about 5 or 6 cycles until finally it posts and then the bios safe mode message pops up.
wondering if anyone else with bios 1802 can reproduce this as well or if its just a memory instability from resetting numourous times.
Also the event 137 isssue ive read people report on this forum i have as well and notcied after the last bios update 1702. After waking from sleep. Just pops up in the event viewer as an error, no effect on anything else
03-08-2021 04:58 PM
When you say "Reset", do you mean "Reboot/Restart? I ask this because if you reset your PC, you erase everything and install a fresh copy of Windows (Settings/Update and Security/Recovery/Reset this PC). Also, have you fiddled around with the DRAM training settings in the BIOS/Firmware? I have 128GB in my Maximus XI Extreme and when it does the DRAM training it takes one minute and 14 seconds (1:14) to get to the desktop. Also, regarding the XTUService, uninstall IntelÂ® Extreme Tuning Utility and overclocking through the BIOS. I never like the IntelÂ® Extreme Tuning Utility because it does take a bit longer to boot when it's active on the system.
03-08-2021 10:10 AM