12-24-2020 05:11 AM
12-28-2020 05:15 AM
you post the same answer in every thread.... you see how many people have problems with the bios 1802... if you have no problems then post your specs and settings... your answers donÃ¢â‚¬â„¢t help anyone...IÃ¢â‚¬â„¢m not a newbi neither a pro but. If I use the standard settings before and now with the same settings I have problems with the bios 1802 there must be something wrong now... or they make this on purpose for selling new products... btw they didnÃ¢â‚¬â„¢t post a change log...
01-09-2021 09:48 AM
01-10-2021 06:55 AM
I'm on a 9900KF + Maximus XI Apex.
1602 and previous would boot fine but 1704 and 1802 would not post!
I decided to sell my Hynix CJR based RAM and go to Samsung B Die, and now it POSTs.
At first 1802 was very wonky and the BIOS screen LAGGED big time.
But after I keyed in XMP, SVid typical scenario, and Sync All Cores x47 I am up and running normally.
Ultimately when Asus decided to change the way the boards handle memory it broke compatibility with certain kits.
Hynix is not going to be a priority for Asus to test.
I urge everyone looking to update to this BIOS to stick with known compatible memory.
01-10-2021 07:40 AM
I'm running B-Die (and RAM on the QVL) and still have weird ram training on reboots, despite timings mostly being manually set, MRC Fastboot on etc.
01-11-2021 01:10 PM
From my experience with Asus Maximus XI series boards, this happens when the ram is on the edge of stability (even if all the ram tests in widows seem stable).
01-15-2021 07:48 AM
I wouldn't even begin to know where the instability lies. It seems more common from cold boot, or even when warmed, but it's fairly inconsistent.
01-15-2021 09:19 AM
You are asking your CPU to do 4000 CL16... I wonder if my dud 9900KF could hit that on any BIOS.
I wish Asus was a little more transparent with the changes they do on their updates. Did improving system stability as claimed require them to sacrifice the OC ability of the boards?
02-23-2021 01:06 AM
Since Updating my MB to 1802 i can boot with XMP 2 profile but the my pc needs now longer to start into the Post screen (rog logo), Displays stays dark for 1-2 min until the board go through all checks (hdd check, mem check etc..) after all tests it starts normal....*
Anyone has the same issue?*
02-23-2021 11:30 AM
With the 1704 and 1802 i cannot boot to windows without xmp 1 enabled
02-27-2021 11:16 PM
What kind of memory are you using.... Samsung, Micron or Hynix? The latest builds seem to not work with Hynix at all for me. I switched to Samsung.