07-10-2018
04:33 AM
- last edited on
03-05-2024
07:38 PM
by
ROGBot
07-21-2018 06:48 AM
07-21-2018 08:00 AM
Phillyflyer wrote:
Your problem from waking properly from sleep mode and not booting is most likely vcore related. 5.0ghz @ 1.225v seems to be an extremely low vcore to have that chip stable. By default the chip has a vcore of 1.30-1.31v....What stability programs have you ran to stress the chip ?
07-22-2018 01:38 AM
07-22-2018 04:45 PM
Phillyflyer wrote:
Your problem from waking properly from sleep mode and not booting is most likely vcore related. 5.0ghz @ 1.225v seems to be an extremely low vcore to have that chip stable. By default the chip has a vcore of 1.30-1.31v....What stability programs have you ran to stress the chip ?
07-24-2018 10:31 AM
Phillyflyer wrote:
Your problem from waking properly from sleep mode and not booting is most likely vcore related. 5.0ghz @ 1.225v seems to be an extremely low vcore to have that chip stable. By default the chip has a vcore of 1.30-1.31v....What stability programs have you ran to stress the chip ?
07-23-2018 08:02 PM
07-24-2018 09:12 AM
caqo1971 wrote:
I have an odd issue with this 1602 BIOS. I'm on Maximus X hero Wifi AC version. I updated the bios and now I can't see Wifi adapter on device manager, I double checked that I flashed correct version, and I have that devide enabled on bios.
Anyone could check if have the same issue??.
07-24-2018 11:28 AM
07-24-2018 11:50 AM
Phillyflyer wrote:
Bro....not in the least....I have yet to see any 8700k nor 8086k...that can pass a Prime 95 stress...2.. 4..6...even 8 hrs at 5.0ghz with such a low vcore.....If such a chip exists...it is truly rare...so rare infact...Silicon Lottery can't seem to deem one in inventory.....I'd be more that happy to congratulate the individual(s) who have such a chip ....and the documented stress test that backs that claim.....Aida64..Intel Burn Test...
Real Bench are all stress tests for CPU stability....but not as taxing as Prime95 if your looking for true stability.. IMO
07-24-2018 12:13 PM
ftln46 wrote:
True stability is in the eye of the holder, if your biggest most taxing workload is Blender or Premiere then that should be used for stability.
Dont touch Prime95 with a barge pool, it just cooks your cpu like no other workload out there, completely pointless imo..