cancel
Showing results for 
Search instead for 
Did you mean: 

Maximus X Apex GSkill F4-3600C17D-32GTZR

Thrawn0502
Level 7
Hello, i have some problems to get the RAM working in XMP mode, ive i switch to XMP the BIOS Code LED says first 43 after that 01 and 03 and stuck at this point.
The Timmings and Voltage are right but i cant Boot with XMP setings, can someone help me pls?
219 Views
5 REPLIES 5

Silent_Scone
Super Moderator
Hi,

Try setting a manual VCCIO and VCCSA voltage of 1.2v, see if this helps.
13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

Thrawn0502
Level 7
Thanks, after updating my BIOS all is working fine. 🙂

Thrawn0502 wrote:
Thanks, after updating my BIOS all is working fine. 🙂


Glad to hear it 🙂
13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

I have another Question about the Board, in BIOS OC Profiles are 2 Profiles from der8auer with 5 GHZ. Has someone testet it without removeing the heatsink from 8700k? I will give it a try my cooling is an AIO BeQuiet 280 Silentloop.

Thrawn0502 wrote:
I have another Question about the Board, in BIOS OC Profiles are 2 Profiles from der8auer with 5 GHZ. Has someone testet it without removeing the heatsink from 8700k? I will give it a try my cooling is an AIO BeQuiet 280 Silentloop.



I have to assume you mean without removing the IHS and not the CPU cooler? 😉 The 280 should do just fine, but every CPU is different. Just be sure to check what the CPU temperature is under load when testing stability.
13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090