Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

I have a problem with the XI hero wifi and the Ram

rukssian19
Level 7

‎03-31-2020 12:24 AM - last edited on ‎03-05-2024 08:15 PM by Community Admin

I tested a lot of rams and do no work.

Always the system puts memory OK on the start and the bios puts me the vccio to crazy numbers

I have a set of 3600 cl 16 and do not work good at 3600 only at 3200

I have another set to 4133 cl 19 (with this not even start ever)

And i have another of 3400 cl 16 and its the same like 3600 cl 16 only work at 3200mhz

And i have another of 3600 cl 19 and 3600 cl 18 and the same, i dont know what more i can test or do always MEMORY OK and a crazy values on Vccio and system agent voltage

Im so lost at this point

PD: i use the las bios version and yes i turn back to an older bios version and it dids the same. (i did a clear cmos too 😞 )

Id anyone can help i would apreciate it so much THX.
Labels:
0 Kudos
1,729 Views
2 REPLIES 2

howxcore
Level 10

‎03-31-2020 09:18 AM

rukssian19 wrote:
I tested a lot of rams and do no work.

Always the system puts memory OK on the start and the bios puts me the vccio to crazy numbers

I have a set of 3600 cl 16 and do not work good at 3600 only at 3200

I have another set to 4133 cl 19 (with this not even start ever)

And i have another of 3400 cl 16 and its the same like 3600 cl 16 only work at 3200mhz

And i have another of 3600 cl 19 and 3600 cl 18 and the same, i dont know what more i can test or do always MEMORY OK and a crazy values on Vccio and system agent voltage

Im so lost at this point

PD: i use the las bios version and yes i turn back to an older bios version and it dids the same. (i did a clear cmos too 😞 )

Id anyone can help i would apreciate it so much THX.


first what is the exact memory module your using (vendor) and model #.. and have you used any XMP profiles? (XMP, XMPII)
0 Kudos

rukssian19
Level 7
In response to howxcore

‎03-31-2020 01:37 PM

howxcore wrote:
first what is the exact memory module your using (vendor) and model #.. and have you used any XMP profiles? (XMP, XMPII)


yes always i used xmpII but i tested with xmp1 and the pc do the same thing.

i used this 4:

#1: F4-3600C19D-32GSXWB (never worked)
#2: PVS416G340C6K (this worked from july to december/january --- i was using 4 modules for 32gb)
#3: F4-3600C16D-32GTZNC (now working, but when i have the pc a few hours OFF the VCCIO and the VCSA changes randomly)
#4: PVR416G413C9K (never start with 4 modules (it say CC error), only start with 3 but do not work with xmp)
0 Kudos