cancel
Showing results for 
Search instead for 
Did you mean: 

Hero XI BIOS 1105

Yes_ImP
Level 7
Hi.

After update can not boot with G.Skill F4-3600C17D-32GTZR XMP profile at all.
I tryed to set DRAM 1.4V, VCCIO=1.2 and VCCSA=1.25, 18-18-18-38-T2, mode1, mode2, auto, auto voltage - it's just not work with any settings.
With BIOS 0805 I was able to boot on 3600-3800 MHz but there was instability in tests.

CPU: 9900k
165 Views
14 REPLIES 14

edwin4321 wrote:
similar boat, I got 4x16gb trident z 3600 mhz on a maximums hero xi and all 4 sticks work in b1&2 but none work in the a slots, so right now I'm running 2x16gb on the b slots, any ideas on how to get all 4 slots working

I had same problem coz of bad contact CPU in socket. Check If some trash like dust, hairs or pieces of thermal paste could get there and try to reinstall CPU.
In my case the reason was: http://prntscr.com/omk69q

Also, if you have a time, could you test 2 sticks in A2+B2 slots with XMP enabled?
I'm getting errors with 2x16 3600 MHz in https://hcidesign.com/memtest/ on 200-300% of test.

Phoenix2000 wrote:
Stay on Bios 0602, i have tested all Bios except 1105,on my Wifi XI, 0602 it´s the most stable Bios for Memory



I agree. I am still on 0602.

Phoenix2000 wrote:
Stay on Bios 0602, i have tested all Bios except 1105,on my Wifi XI, 0602 it´s the most stable Bios for Memory
The most IMC make 4133 or higher with 4x8GB B-Die.And use Mode1, with Mode 2 i can´t get higher than 4133.
Max. stable 4x8GB 4500 but for that you need good IMC


max. Performance stable 4x8gb 4350


Hey,

Unfortunately we are in different boat - G.Skill F4-3600C17D-32GTZR is 2x16GB which is not on Asus QVL but it is at G.Skill QVL which I trusted and it was my mistake. Probably I could run these on 2 DIMM slot motherboard without problems. Got some spare kit G.Skill Trident Z 2x8GB 3000Mhz CL14, I can get them to 4000 but I wasted too much time for tuning timings without success to get error free Karhu Ram Test.

Melkor
Level 7
Just checked G.Skill QVL again, Z390 is not there at all, I swear it was in the past...

Yes, no one Z390 board in F4-3600C17D-32GTZR QVL now. Link to the kit is changed too, maybe they made some kind of redesign.
https://www.gskill.com/qvl/165/166/1536656046/F4-3600C17D-32GTZR-Qvl
I'm asking all owners of this kit: try to write to Asus and G.Skill support, so they test this kit with Asus Z390 boards.

I tried again 0602 and 0805, I can boot with XMP on both, but still getting random errors in memtests (testmem5, hci memtest) with any settings of voltage. My stable preset is 3466-16-16-16-36-2T 1.35V, 1.15V, 1.2V.

udp. G.Skill updated QVL and Z390 boards (including Hero XI) returned.