Hi,I'm a newb here so please forgive my ignorance on this.I am using a Samsung NVMe SSD on slot M.2_1, which apparently you loose the use of SATA 1 when doing this.Do I have to go into the BIOS (under Advanced) and disable SATA 1 myself or is this au...
Hello I'm having an issue getting into the BIOS on a new build. When turning on it doesn't recognize that I'm pressing DEL or F2, and then it hangs on American Megatrends screen, which says "please enter setup to recover BIOS setting" and "Press F1 t...
Dear all,I am having issues with XMP profiles on the latest BIOS version 1105 on my ROG Maximus Extreme.Previous version 1005 (and below) were OK.When enabling XMP (1 or 2), my RAM OC settings are properly detected, and I can save settings OK.But aft...
New Asus Maximus XI ROG Hero Wifi Motherboard z3901. Upon initial boot up (plug in power supply cable) the computer reboots upon me pressing the power on button, like a double post. Is this normal? I have updated the bios.2. Upon booting up the c...
Good afternoon,The latest version of Windows 10, 1903, seems to pose compatibility problems with previous Intel CPU microcodes, on Z370.If the microcode replacement was done through a BIOS update, OC capabilities are altered.If the microcode update i...
Hi, I recently got a NVMe and i'm really enjoying it. It's plugged into the slot by the CPU and set to PCI-E in the bios for maximum speed.My question is does my motherboard support full speed on both of the M.2 slots? I would like to add another NVm...
I currently have a Maximus Hero X wifi that I updated the me fw to the current fw 11.8.65.3590 that is on this site and I was wondering if anyone would be willing to help me flash back the original me fw that came with bios 1704. 11.8.55.3510
maximus xi hero wifi ,i5-9600k . i enabled xmp in bios , & overclocked in windows with Intel(R) Extreme Tuning Utility V6.4.1.205, i tried defaults in ixtu, to go back to cpu defaults but with no luck , cpu stays at 43x all cores ,will not go any hig...
Sorry if this is a stupid question but is anyone able to help me make sense of the list of LAN drivers in the image below?I've tried to make sense of them but they just appear to be a confusing mess to me what with version number not being in any log...
Hi folks,I've connected the RGB cable to the RGB_Header 2 at the top of the board. When using the ASUS Aura Sync Software the cooler does not get recognized. How can I fix that?I've installed the latest version of the AURA Sync Software.If I go to se...
.jpg "Raja"){kind=avatar}
