Hi guys,I purchased a asus z390-f gaming mainboard around 6-7 weeks ago and its the most expensive mainboard i ever purchased. I chose Asus, because my latest Mainboard was/is a z97-Pro Gamer which works fine and I had very, very bad experience with ...
I just upgraded x apex motherboard. Now I'm using xı apex. And all other equipment is the same. xı apex old ramler will not work properly. F4-4000C18D-16GTZ travelers. Xmp n1 18-19-19-39 1t profile never turns on the system gives 7f error only 3...
ROG MAXIMUS XI HERO BIOS 1401Improve Memory overclocking rulesImproved compatibility with the Intel H10 Optane ModuleFixed an issue that prevented the adjustment of the Tjmax parameter when using an i9-9900KS processorBefore running the USB BIOS Flas...
I have had this build running I think since May this year. I have not had any windows errors or issues prior to the issue below.Windows 10Monitor ASUS PG279QMotherboard: ASUS Maximus XI heroCPU: Intel i9 9900kMemory: Corsair cmw32gx4m2c3200c16 - 2x...
i have found a good chip ! think i will keep itnote : this is on air cooling thermalright true black 120 ( 2 x 120mm push pull ) 11 years old from my core 2 duo days note : not delided 8 hrs asus real bench stress test stable8 hrs prime 95 29.6 sma...
I just bought the Maximus Xi Extreme for my new build and was thinking if it will be best to use the onboard sound or buy an internal soundcard, like the EVGA NU Audio Pro 7.1 card getting released 12/07/2019 to run my Beyerdynamic DT 990 PRO 250 ohm...
Two pins on my new XI Hero's USB 3.0 connector were either bent or the cases USB 3.0 plug was faulty and bent them. Upon trying to straighten them one simply broke off. I believe the pin might be pin 10, the ID pin. Is this an over voltage protection...
Hi,I've got problems to get WLAN and Bluetooth working under WIN10 64-bit Build 1909 (18363.476). I've enabled Bluetooth and WLAN in the latest BIOS 2203 but the devices doesn't show up in the device manager and I can't get them to work. The WLAN/Blu...
Hello together. I cant get my memory run at 4400mhz. Im using A2-B2 ram slots. I tried to switch slots and switch ram oposite maximum what I can have is only 2133mhz.I Tried xmp 1 and 2. Tried to add dram voltage, vccio voltage and sa voltage but not...
HeyWell i guess its time to post this problem cause i want a solution.8 out of 10 times i boot up i get a black screen, same thing happens when it powers down when its not being used i press the keyboard and a black screen appears, now i like to thin...
