Z370 / Z390
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Intermittent POST please help

I ordered a DIY build from newegg. When I power on the machine, it'll only post sometimes. When it posts, it runs perfectly, absolutely no issues. The voltages read out properly in the bios and I'm able to set up xmp and tweak my RAM settings. I've ...

bitcoin by Level 7
  • 2017 Views
  • 3 replies
  • 0 kudos

Trident Z 4266MHz - how to run?

Hello everyone,My hardware:- Asus ROG Maximus X Hero (bios v. 1003)- F4-4266C19D-16GTZA (2x8 GB) - in A2 and B2 slots.I cannot boot up my system (Win 10 Pro 64) when I set DRAM in XMP mode, so please help, how to run manually?Which specific BIOS set...

Meloman by Level 7
  • 18178 Views
  • 26 replies
  • 0 kudos

BCLK Frequency : DRAM Freq Ratio?

Hi allWhat should I be setting this to in the bios?I've left it at auto, but as far as I can tell 100:100 is what I need to put it at?Also with regards to the cpu/cache current limit max and max freq ratioWhat does this actually do? And what settings...

71707
alyraver by Level 10
  • 5729 Views
  • 1 replies
  • 0 kudos

Maximus X USB 2.0 Ports Question

I have a lot of USB devices and am using up almost all of my ports. The Maximus X board has 1 USB port labeled BIOS and 1 labeled Keybot.Is there any downside to using these ports with normal devices or do they just provide additional functionality i...

Formula X safe Io/SA Voltage ddr4133

Hi,*I got my Memory gskil f4-3866 c18 32gb ( 4 dimms)Stable @ 4133 17-18-18-38 -380 vdimm 1,45vBut my cpu wants for this 1,3io 1,3saIs it safe solong or better 3866 that are stable @ 1,10 io/saI cant find a official Answer -.-*

Slow Samsung 960 Pro m.2 RAID 0 performance.

Hey everyoneI recently got 2 new 512GB Samsung 960 PRO M.2 Drives. I installed them on my new Maximus X Apex and installed windows on them (RAID 0).Now, using a disk benchmark program, like CrystalDiskMark, I get around ~3200MB/s sequential reads and...

How to fix a permanent extreme amplify level?

How to fix a permanent extreme amplify level? Z370-G Gaming. Please release a new version realtek audio driver for my motherboard! Amplify level resets to extreme level every reboot !

EtoEgor by Level 7
  • 10080 Views
  • 12 replies
  • 0 kudos

System instantly powers off when plugging in USB

Not sure why my other thread was closed. Litereally only had my post in it and an Asus rep and it was close????Anyway, So I have 4 USB devices already plugged into the back of my computer with 1 USB port (USB 3.0 SS) at the top of the motherboard not...