Z370 / Z390
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

BIOS 1903 XMP failing to post Strix Z390-f motherboard

I have just updated my bios from 1802 to 1903 and I cannot use XMP profiles as machine then fails to post and goes into safe mode. If I use the base BIOS it works and if I leave on auto and change the clock speed to that of my memory it works. Not ...

How does TVB determine VID for boosted frequencies?

Hello!Getting into TVB to milk a bit more out of my 5.1ghz 10900k OC. I thought that using TVB would give you a little extra at light loads beyond your all-core ratio without adding voltage. I have a 5.1 all core 10900k that is stable at 1.32v under...

Z490 New bios with new feature OCTVB

you can tell the bios for the model from the link names:https://www.dropbox.com/s/kl65p17gjpbiyx4/ROG-STRIX-Z490-I-GAMING-ASUS-0901.rar?dl=0https://www.dropbox.com/s/xng2l0aupm72osv/ROG-STRIX-Z490-H-GAMING-ASUS-0901.rar?dl=0https://www.dropbox.com/s/...

Shamino by Moderator
  • 31439 Views
  • 85 replies
  • 0 kudos

XMP Issue - Strix Z390 Gaming-E

I've done some searching and have seen some XMP issues with the 19XX BIOS but I haven't seen mine specifically so I'm hoping it's alright to start a new thread on this.I originally tried turning on XMP while on the 1802 BIOS and my PC would always cr...

Overclock 9700K + Maximus XI Hero Bios Glitch?

Hi GuysI have one 9700k and I wanted to try to overclock it. From what I read, it is recommended to set the AVX offset so that the frequency is lowered when this specific instruction is being used.I set the cpu frequency multiplier to reach 5Ghz (50)...

Using multiple M.2 SSDs on a Maximus XI motherboard

Hi Everyone!Please, be so kind to help me out in the following issues, since I'm not an expert in these matters.I'm planning to build a new rig around a Maximus XI motherboard. I would like to use four M.2 NVME SSDs: 2x970 EVO 2TB and 2x970 EVO 1 TB....

Maximus XI E and M.2_1 / M.2_2 with PCI-E x16_1 Question

FolksI presently have a single Nvme M.2 stick in M.2_1 slot and still can maintain x16 speed in my PCI-E_1 Slot (GPU)....Question, if I add a 2nd M.2 Drive to my other onboard M.2_2 location, will my GPU (3080 Ti FTW3) continue to run at x16 speed?Im...

How to disable PPD on Maximus XI Hero?

Hello.I wanted to disable precharge power down (PPD) on my board for better RAM latency. I cannot find a setting for it in the BIOS. Is there any modded BIOS that exposes this setting? I have tried various versions of MemTweakIt. They all fail to ini...