Z370 / Z390
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

WIFI + FANs Problems [FR]

Hi,To start, sorry for my bad english, i'm french, i will try to explain my problemsFirst, this is my configuration:CASE NZXT 450ROGI7 8700K + Watercooling CoolerMaster ML240L RGBASUS Z370E16Go RAM CORSAIRGTX1080I have two problems:1) I have a fan hu...

Ovarmer by Level 7
  • 1355 Views
  • 4 replies
  • 0 kudos

Maximusw X Formula Sleep Problem

Hi all Today my computer has started to have problems when I use the 'Sleep' function in Windows.The computer will go into 'Sleep mode' but then within 5 seconds it starts up again. However this time the Q code now reads 30 where as before a clean re...

alyraver by Level 10
  • 1037 Views
  • 0 replies
  • 0 kudos

How to Install 2nd NVME in Max 10 Formula with 2 1080g1

Hi ,I have a Maximis 10 Formula and have installed 1 , NVME ssd on the board under the heat sink , i have 2 gpus 1080 g1 , i want to install another m2 nvme can i do so or not .i also have 3 samsung 950 ssd connected to my SATA ports . a friend told...

Intel Optane Drive on Maximis 10 Formula

i want to install a intel optane ssd in my maxmis 10 formula , allreay 1 have nvme installed under the heat sink . My OS is in the NVME and i have 3 sata SSD connected along with 2 1080 g1 in sli .i was told that optane would not boost anything and ...

Maximus X Hero and Gskill 4133mhz compatibility

Hello everyone, it's my first post in the forum.Specifications:- Motherboard: Asus Maximus X Hero- RAM: Gskill F4-4133C19D-16GTZR- Processor: i7 8700k- Graphic Card: Asus Rog Strix 1080TI OC- SSD M2 960 pro 512gbI bought the ram without knowing that ...

TarroX by Level 7
  • 9472 Views
  • 9 replies
  • 0 kudos

Asus Hero X z370 m.2_1 Heatsink Guide

Hi I just bought Asus hero X z370. While installing Samsung 960 EVO on m.2_1 I noticed that I dont know how to use heatsink. There is label on it says remove. I just remove lebel? And use this glue/foam as a thermal bridge or do I need to remove thi...

i7 8700K,Z370E And G.Skill 3866MHz issue

Hello, My Speci7 8700KZ370-EStrix 1080TI OCSamsung 960 EVO 250GB (OS Win 10 64)WD 4TBYesterday I replaced my ram from Team 32GB 3000MHZ To G.skill 32GB 38664x8GB G.Skill TridentZ RGB (F4-3866C18D-16GTZR / CL18-19-19-39 1.35V)then I enable XMP in bios...

Bios Version 1101 released on Maximus X Boards

Noticed my Maximus Code X had a bios update to 1101. Only info it list is * Update Intel CPU microcodeGuessing some Spectre or Meltdown fixes.Seems to be working fine, though it did seem to reset my XMP settings after the update.