Z370 / Z390
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Z370 I ITX missing important AIO pump speed limit in bios

Hello I just found out that AIO pump monitor is missing speed low limit selection and warning, is that something we can get implemented ASAP?I'm not sure if it counts for all asus rog motherboard bioses, but it is rather important thing to leave out....

wazer2 by Level 8
  • 2285 Views
  • 6 replies
  • 0 kudos

64gb kit for Maximus X Hero (no wifi)

Hello,Im looking for a 64gb memory kit (4 x 16gb) for my Maximus X Hero (no wifi) , highest speed possible please , anybody have any recommendations ?Cheers,FTLN

ftln46 by Level 9
  • 1127 Views
  • 1 replies
  • 0 kudos

AVX offset not working properly?

I'm playing with Overclocking and seeing something I don't expect. I successfully tuned 4.9GHz manual mode all core with no AVX offset.So I entered a value of 2, and I know it's supposed to downclock by 200MHz (BCLK=100) only when an AVX instruction ...

Issues With WI-FI on the Z370-E Motherboard

Hey Guys,I built a new pc 2 days ago, however im having troubles with the onboard WiFi, the drivers don't seem to be installing properly on it, device manager isn't picking up the adapter, i can't see it in ipconfig /all, i've uninstalled and reinsta...

SKiD1r by Level 7
  • 3851 Views
  • 3 replies
  • 0 kudos

Incorrect CPU Power Reporting?

Not an Overclocking expert...I've updated to latest bios and installed some of the new Z370 drivers and playing with overclocking again.I've noticed that the "CPU Package Power" is being reported as extremely low in multiple programs even while under...

Maximus X Code with Corsair Vengeance RGB Pro

Has anyone been able to get the new corsair rgb pro ram to work on this board? If so, which speed did you purchase? I bought both the 3000hz 32gb kit and the 3200hz 32 gb kit and I can't get even a single stick to work. I know the board works because...

8086k 5.3ghz overclock

Finally managed to get the 8086k overclocked to 5.3 ghz and prime 95 stable with an 8 hour run. using bios 1503. Chip has been dellided with a copper heatsink and ambient temp at the time was 22 celcius. Vcore was set @ 1.425V with LLC 6 with the...

8700k Z370 Hero X G.skill 4266 trident z RGB issue

Hi guys, I recently bought the new platform with the following ram https://www.gskill.com/en/product/f4-4266c19d-16gtzr i managed to make the system stable to 4000 mhz, but i can not start at 4133mhz with bios 0505, with previous bios 3866 maximum li...

68598