Z370 / Z390
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

W_PUMP+ header with EK PWM D5 on Maximus X Formula

Hey all,I'd like to monitor the pump RPM and make sure the system will shut down if the pump fails (ie: 0RPM). Currently the pump is not showing up in the BIOS although I do have it plugged into the W_PUMP+ header.The system is up and running for a f...

h34vy by Level 7
  • 2 replies
  • 0 kudos

Fan RGB not working on Maximus X Hero

Just built the system in a CoolerMaster H500P case and can't get the front fans to light up. The board shows 2 RGB headers....1 listed as Aura and the other listed as Addressable but neither light the front fans up. The BIOS shows it set to on and ...

Which motherboard is best for SLI 1080Ti? Space wise

I have a z370-F in a meshify C case, but despite the fantastic (air) cooling and no matter the fan curves, the top GPU in SLI is hitting 85c. Bottom card hovers at 65-68c.Without resorting to water cooling, is going to a different motherboard, with b...

F0x135 by Level 8
  • 8 replies
  • 0 kudos

MF10 and Corsair Vengeance Pro RGB 3200 stuck at 1.2v...SOLVED

SOLVED...Motherboard scratched near standoff.Hi guys, having a strange issue with my Maximus Formula X and some new ram I installed. When I enable the XMP profile for this Corsair Vengenance Pro RGB 3200 mem everything applies as expected in the BIOS...

Disabling the C1 state (not C1E)

When I set the C-state control to Disabled and the CFG Lock to Enabled in the UEFI Setup (so the Windows CPU-idle driver should not be able to re-enable any C-states) the CPU still seems to use C1 (basically clock gated HALT state) besides C0 (full ...

What to do, I've got memory instability with XMP

Hello!System is 8700k running on a z370 Hero AC wifi motherboard. GPU is: aorus 1080tiDDR4 is: g.skill F4-3600C15D-16GTZ Asus bios: I want to get it running with overclock and adaptive, but because of unstability it has been very difficult getting re...

Cant get G.skill kit working on Z370 Maximus X Formula

Hi folks,As the title mentioned i cant get my G.Skill kit stable on my Z370 ROG Maximus X Formula.Im using it with an 8700k.kit: F4-3600C15D-16GTZIts in the QVL, XMP profile isnt working stable (Karhu is finding errors within minutes)So i swapped out...

NarfTV by Level 7
  • 79 replies
  • 0 kudos

Strix Z370-E - Second PCIE M.2 slot not selectable as a boot device?

I have a 500GB Samsung Evo 970 in PCIE M.2 slot 1 and a 256GB Evo 970 in PCIE M.2 Slot 2.Only the first is selectable in the boot order. I want to boot to the second. Do I really have to switch the slots they are installed in and pull that thermal pa...

damag0r by Level 8
  • 1 replies
  • 0 kudos