Z370 / Z390
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

USB 3.0 ports only gets 40MB/s speeds

Hi!My mobo: ASUS ROG MAXIMUS X HEROMy problem is that my USB 3.0 ports are not performing as they should. I only get 40MB/s barely on them. I am using a 3.0 cable yes and my device is also 3.0 compatible since its works on my laptop's 3.0 port.The fr...

cutoff flushing bios

I wanted to update bios on M11A and the incredible has full middle of the update power cutmy motherboard starts and remains locked on 61j have tested bios two my like it must do what help thank you

gogo974 by Level 7
  • 1600 Views
  • 3 replies
  • 0 kudos

Cinebench and timespy cpu weird decrease in score. Question.

Hello. I have 9900K oc to 5ghz. MCE ON,INTEL TURBO ON.*Temps are 70C max in looped cinebench. Gpu temps fine. Mobo Asus Prime Z390-A with updated BIOS/UEFI.*So first i had newest drivers 417.71 and my cinebench scores was always consistent like 2115-...

Strix Z390-F stock i7-9700k throttle to 3.9ghz

Hey guys, I just upgraded from an i5-7600k @ 4.6ghz on a Prime-P motherboard to a stock I7-9700k / Stix Z390-F and right off the bat I noticed worst performance in games.Started to do some testing and my CPU is throttling immediately to 4.4 and then ...

Hero XI ATX 24 + 8 or 24 + 8 + 4

Hello all,Novice here have a Hero XI Wifi board my PSU which is a HX1000 Corsair only had a 24 + 8 power cables is that fine as I notice I could put a 4 pin cable next to the 8 pin socket is there any downsize to this?

Raigoz by Level 7
  • 1217 Views
  • 3 replies
  • 0 kudos

Maximus X intermitent failure to post

Hi,I have a Maximus X Hero with 8700k, 32GB RAM (on compatible list). Latest Bios.I am finding that on some cold boots the PC fails to post. SOmetimes the fans ramp up to max and stay there and others they ramp down to the bios set values but still n...