So first I have to point out, I'm no expert, last time I built a PC was 10 years ago. And I never did any bios stuff or overclocking. Anyway, I recently bought Z390F, a i9-9900K Coffee Lake S Prosessor - 3.6 GHz, G.Skill TridentZ DDR4-3600 C15 DC SR ...
Hi,Need help please, don't now what else to do, i can't get the system stable. Asus Strix z390-E Gaming bios 0805; newi7 9700K + Noctua NH-U12S; newG.Skill 2x16Gb DDR4-3200MHz CL16 (F4-3200C16D-32GSXWB -- Q.V.L.); newAsus Dual GTX 1060 6Gb firmware ...
Hi everyoneI've just recently finished dialing in my stable 5Ghz overclock in manual mode with the following settings:- AI Overclock Tuner XMP I (clicked Yes at the prompt)- Sync all cores- AVX Offset 0- Manual Voltage Override 1.33V- LLC7- IA/DC Loa...
I used this youtube guide to get my 9600k to 5.1 on my xi formula. Its stable but I feel 1.455 volts is way to high. I have to say it worked just the way he said the first time. In my experience thats rare when overclocking. https://youtu.be/95Ujni7...
hi,I've some problems like crackling withe the motherboard,I've try to Enable MSI (Message Signaled-based Interrupts), in vain,if somebody have a solution,
I have a question regarding the reserved mode and slow mode switches on my motherboard(installed in a different direction(off is where on would be, etc) but the switch lever itself is flipped in the direction that matches the manual).Should I keep th...
I have just built a new system (specs below) I'm getting a CC q-code. There's no beeps. Just says no display detected or something to that effect. Can't get into BIOS or UEFI whatever u wanna call it. Max XI Code w/ 9900k16gb of g skill trident z Zo...
I installed two M.2 (Samsung 1TB Evo) with heat sinks on the DIMM.2. But, as you can see on the picture, the M.2 bends easily. Is this a problem? Maybe it will be better with some "heat" in operation? Otherwise I have to buy thinner thermal pads (e.g...
Hello everyone!I've researched this topic already quite a bit but haven't really came to an exact answer yet.Apparently, ROG Mainboards (and probably Mainboards in general) try to always achieve the best performance of the used hardware on default, w...
helloWith this motherboard Asus Maximus XI Extreme (chipset Z390) last bios 805can you tell me if it is bad for the motherboard and the memory to have an VSA set to 1,4000 or 1.4500volts ? or to an maximum of 1.5000volts ? it stay safe for 24h/7d ?i ...
