I build my PC in November 2018 so it is pretty new. Since the beginning, my PC always starts 3x until it finally boots (On, Off, On, Off, On, Boot) and also the LED's on top of the rear connectors are not shining (all LED's enabled in BIOS) white the...
I just changed the motherboard from strix z370f to z390f, but after all I installed I found it couldn't boot (no signal) and the led q light was red (on cpu led). even though on z370 everything was fine. i3 8350k 8gb ram 3000mhz, auraflow 120 Thank...
Could someone please help.I was following this guide and in the process of attempting to load my backed up PK key I instead saved over it. Does simply using the default keys make any difference?
Hi.Can I use basic version XI Hero Wifi bios with this Black Ops version.Asus has not updated Black Ops bios they website:https://www.asus.com/Motherboards/ROG-MAXIMUS-XI-HERO-WI-FI-Call-of-Duty-Black-Ops-4-Edition/HelpDesk_BIOS/Thanks.
Hey, since some time everytime I enter BIOS it asks me for time and date, and the showed values are fine so I just have to click OK but it was not like this some time ago. Is it some kind of error? I did not notice anything other. All values are ther...
I got a Hyper M.2 x16 card and on my Strix z390F, I can get 2 M.2 cards working on it if I install it on to PCIEx16_2 slot (middle one). This is expected as the manual says the lanes are in 4+4 configuration.Just to check I connected it to the PCIEx1...
I was just wondering what method you are using or which is the best for a clean install of Win 10.Do you have your network connected and wait until Windows finishes downloading drivers/win apps etc.then start installing all drivers?or do you instal...
Hi guys.I'm looking to upgrade my system from my current delidded 4770k. However, I'm using the gamerstorm tristellar case now which means whatever I build will be restricted to the itx form factor and a 120mm aio radiator.The reason for this particu...
please delete-thanks.
Hey guys, I just finished my 9900k build with the Maximus XI Gene.From my initial testing, I see that core VID maxes out at 1.299v even if I push core voltage to 1.38v. I have LLC7 as well. Don't want to push the voltage any further. Can I still get ...
