Z370 / Z390
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Audio 1809

I am here to plead a FIXAudio programs ARE NOT WORKING with 1809.I try all combinations. drivers, original from the website of my board. crash on all scenarios. there is no way to use the realtek driver. 1803 works perfect with all. drivers and fixe...

What are your Vram temps on your maximus xi?

What Board, Chip, Voltage, Clock, CPU synthetic test temps, and lastly Vram temps. I did a search and did not find a similar post, but i do suck at searches.I am curious to see what the difference is between chips and what difference the built in wat...

Audio Drivers - A Quick Question

Hello. Wow it's difficult getting anybody to respond on this forum. At this point I just feel ignored.With that I apologize if this is the incorrect place for this, however I don't think the question would be all that hard to answer. At least not for...

maximus hero xi

hello everyone..i just bought a hero xi and my old board had only 8 pins for the eatx on the upper left corner..this board has 12..my question is...do i have to run another cable with a 4 pin connector to the eatx-2 connection. sorry if its a dumb qu...

1PYTHON1 by Level 8
  • 6629 Views
  • 28 replies
  • 0 kudos

DRAM Voltage stays on 1.092V no matter what I change in Bios!

Hey,So I got the XI Board and using this RAMhttps://www.corsair.com/de/de/Kategorien/Produkte/Arbeitsspeicher/DOMINATOR%C2%AE-PLATINUM-Special-Edition-CONTRAST-32GB-%282x16GB%29-DDR4-3466-%28PC4-27700%29-C16-Desktop-Memory/p/CMD32GX4M2C3466C16WWith X...

ehnoah by Level 7
  • 2374 Views
  • 6 replies
  • 0 kudos

Maximus XI APEX Temperature issue?

Hello, I just finished my Maximus XI Apex build with 9900k, 3200MHz 16 GB Ram, Nvme ssd installed on DIMM.2 slot and GTX 1080Ti.When i went to hwinfo/hwmonitor i found one of the temperature (TEMP4) of the MB is very high. about 80 to 85 C and the re...

79372

Displayport on Maximus XI Hero @i9-9900K

Hi,I've connected my Acer 144Hz 1440p monitor via Displayport onboard connector - it is not working in POST/BIOS nor in Windows 10 (no signal). HDMI works like a charm (but tested on other monitor; my Acer has only DP input).When connected via DP on ...

cniedzi by Level 8
  • 2923 Views
  • 4 replies
  • 0 kudos