Z370 / Z390
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Freezing and wont boot/POST

It's been fine for months but has started randomly freezing and then wont boot or POST - no signal to monitor. Motherboard is Maximus X CODE. All BIOS (version 1704) settings are optimized defaults. Some Q-Codes I've seen are:025562A0 According to G...

Maximus xi extreme WB_sensor plug name?

Hi,*I would like to use the wb_sensor slot. Since there is no dispenser with the sensors, I would like to use the slot itself. Professionals level 2 Asus employees in Germany have so much idea, they think this slot is for service! It is the same plug...

S3RIOU5 by Level 7
  • 1913 Views
  • 2 replies
  • 0 kudos

Maximus XI Hero (Wi-Fi) not showing on ASUS Aura software

Hey guys,I recently had purchased the ASUS Maximus XI Hero (Wi-Fi) with an intel core i9 proc - and I'm trying to get ASUS Aura working so I can control the RGB lights on the mobo. When I launch the software, the only option it gives me on the top is...

Help for RAM overclock (G.Skill Trident-Z 2x16GB - Samsung B-Die)

Hello guys, recently I bought a G.Skill Trident-Z 2x16GB memory kit. Exact model number F4-3200C14D-32GTZSK. The ICs are Samsung's famous B-Die, but so far I'm having issues clocking the kit anywhere higher than 3600MHz. It can boot at 3600/14-14-14-...

Wolfdale by Level 7
  • 34071 Views
  • 23 replies
  • 0 kudos

Maximus XI Apex Monoblock

Just a quick heads up, Bitspower released monoblock for Apex: https://shop.bitspower.com/index.php?route=product/product&product_id=7234&search=MXIANews so fresh that they even don't have the picture yet, but it should look similar to this one - Extr...

80254 80255

Ethernet keeps disconnecting on dual boot ASUS Z390 E

I have build a PC two months ago with the ASUS Z390E-GAMING and I have problems with the Ethernet Connection where it keeps disconnecting. Could this be a Mainboard issue ? Does anynone has the same problem ?

z390e_ by Level 7
  • 1632 Views
  • 0 replies
  • 0 kudos

ROG z390 Gene XI DIMM.2 question.

Hi,I'm after some clarification on the PCIe lane configuration when using one M.2 drive in the DIMM.2 AIC. In the manual it states that if a M.2 drive is present in the DIMM.2 slot (DIMM. 2_1) the PCIe x16 slot will run at x8.Can you confirm if this ...

Flam3h by Level 7
  • 7875 Views
  • 16 replies
  • 0 kudos

Asus rog maximus XI extreme bios setting

*1 When SATA56 is enabled, PCIE x 16_3 will run at x2 mode. *2 The DIMM.2 Slot (M.2_1/2) are disabled by default. Please adjust BIOS settings to enable DIMM.2 Slots.When DIMM.2 slot is enabled, PCIex16_1 will run at x8 mode. Please refer to BIOS manu...

Bayx01 by Level 7
  • 2052 Views
  • 1 replies
  • 0 kudos

XI Code RGB

Can someone please post a picture of the RGB lighing on your XI Code board? The lines on the left of mine seem a little faded, not matching the image on the Asus web site...just trying to determine if it's normal.