asus x hero bios 1003 issue / help

[bass_junkie_xl]

2 new problems with bios 1003 now i have noticed .
its a new issue with the fan headers
i have top cpu_opt hooked to a top 140mm fan whhen adjusting that fun
ext_fan at bottom of board adjust with cpu_opt .......

probleme 2

ext_fan 3 i have my water pump to it and now can not run less then 100 % 24/7 in manual pmw mode ..... if i change
minamum % to less then 100 % it goes back to 100 .... i have to use the pre sets of silent or standanrd or its allways 100 % now .....
and i already tried the q fan auto adjusment thing to let me me know what min % evrything can run @

new bios fixes cpu z reporting worng voltege but brakes 2 fan headers and doesnt fix audio crackling

other issue why can i not run my fans less then 60 % or 100 % on this baord ????????
i dont need my fans @ 1800 rmps jet when siting here
i have tried pwm mode / dc mode / auto and then i ran the q fan auto detect mode and it comes back saying my ext_fan 3 cant run less then 100 % wich before i could run any % i wanted in manual mode ( its my water pump ) .
and my cpu fans cant run less then 60 % why ??

[mcmarky]

I think so. But compatible isn't the right description because Asus GPUTweak II can handle and tune my MSI GTX 1080 without any problem. So it is just not desired that this option can be used when you don't own an Asus graphics card. Maybe I get an additional temp. sensor and will install it at the GTX.

Still the request that the case fans may be set below their starting voltage. I can't find an option for extreme low speeds so far.

[bitman]

Menthol wrote:
Because you don't have an compatible ASUS card

Hi is this still an issue where you must have a Asus card to use the GPU TEMPERATURE SOURCE? I have a new RTX NVIDIA 2080 Ti watercooled and I was hoping to control the radiator fans in the UEFI with the GPU temperature source so if Asus is still only allowing Asus only gtx cards to use the GPU temperature source in the uefi then what’s your best recommendation for me to control the radiator fans? Do you think a tee in the loop with a temperature probe connected to one of the external headers is an option?
* * * * * * * * * * * * Thanks in advance Bitman

BTW I could check myself but waiting on new i9-9900K and new Asus Maximus xi Formula before I start my build. I’m just trying to get prepared for the build*