cancel
Showing results for 
Search instead for 
Did you mean: 

ASUS Maximus X Hero Bios 1503 *NEW*

Lotzi
Level 7
205 Views
78 REPLIES 78

MonarchX wrote:
It solved several issues for me - ASUS Xonar DGX PCI-E detection and being able to flash custom UBU-generated BIOS. However, I still can't update MEI firmware to the latest version - the updating utility does not detect platform...

What method did you use to flash bios ?
Asus ROG Maximus XI EXTREME
Intel i7 9900K OC'D @ 5.2 GHZ @ 1.345V (1.296V LOAD) LLC 6 PRIME 95 STABLE 8 HRS
XSPC RX360 Rad (6)Scythe Gentle Typhoon 1850 RPM Fans In Push/Pull @ 1500 RPMS
Swiftech Drive II / Swiftech MCP35X Pump
Enermax Platimax 1200 Watt Power Supply
32GB G.Skill F4-3866C18Q-32GTZR 3866 MHZ CL18 1.35V (OC 4266MHZ 17-18-18-41-2T @1.45V)
MSI GTX 1070 SEA HAWK EK X SLI WITH ASUS HB RGB
(5)Samsung 840 Pro 128 GB In Raid 0
(2) WD 1TB Black Edition
Corsair 900 D

jjxakergm
Level 7
Post contents removed. If can't be civil don't post.

Kiernon
Level 8
Hello all.

This morning, I grabbed 1503 from the link on the first page, put the .CAP in my dump drive, and then updated through the EZ Flash within the BIOS.
Everything updated fine, no weirdness or any abnormalities, and set up my system options and enabled XMP.

Played some games, ran a few benchmarks, and ran a few reboots from restart and shutdown to check for any boot behavior.

So far, everything is working as expected, and am having no instability or issues.

I should note that I'm not currently overclocking anything outside of enabling XMP, so as always, your mileage may vary.

Hopefully this version is smooth for the rest of you.

Take care.
In dreams, I walk with you.

NeoandGeo
Level 7
Whatever Asus broke in the 1401 BIOS has been fixed for me. Couldn't even boot 1401 with more than one stick of RAM, and even then with stock settings I would get WHEA Uncorrectable Errors within 5 minutes of using the PC. Running my 1301 OC perfectly. Will try later on to see if it brings me closer to whatever the second BIOS was where I could run 5.3Ghz/4x8GB 4000 comfortably.

Running 1503 now! its available now in bios update by internet 🙂

floodserv
Level 7
Hmm been watching this thread for a few days..any good news guys? I'm quite reluctant to update since 1401 issues.

runningdodo
Level 7
And what about the new BIOSes for the other Maximus X boards beside the Hero?

runningdodo wrote:
And what about the new BIOSes for the other Maximus X boards beside the Hero?


I updated the Maximus X Code with 1503. Running great.
NAME THE SANDWICH: – White Bread, Lots of Baloney, Russian dressing and served with a small pickle.?


Intel Core i7 8700K @5.1 Stable Delidded
Asus Maximus X Code

16 GB
G skill TridentZ DDR4 ​4266 (PC4 34100)
Corsair HX1000i digital
EVGA 1070 GTX TiSuperclocked+
Samsung NVMe SSD 960 pro M. 2
Samsung 860 Pro
Watercooled with EK block radiator fans etc.

FZero
Level 7
Just updated my Hero X Wi FI, works great for now. I'l keep you posted if anything should happen.

Carlyle2020
Level 10
works great. My Hynix 512x8 /16GB react really fast now (45 ms). Before with v1401 it was 56ms.