9900k @ 5.0ghz asus maximus x code

[Phillyflyer]

Just posting initial results of the 9900k with the asus z370 maximus x code....as stated in reviews...the chip does get a little toasty !!

[JustinThyme]

Am I blind or did I miss the screenie showing all cores?

[Phillyflyer]

JustinThyme wrote:
Am I blind or did I miss the screenie showing all cores?

Screenshots depict all cores in Core Temp.

[JustinThyme]

Phillyflyer wrote:
Screenshots depict all cores in Core Temp.

This

All cores doesnt show that all cores are OCd. I can run 1 core to 5.2 and leave the rest at default and it will show up in all cores as 5.2
Or you can run CPUZ then click on the validate and you get whats in the banner in my siggie where I OCd this 7900X to 5GHz

[Phillyflyer]

JustinThyme wrote:
This

All cores doesnt show that all cores are OCd. I can run 1 core to 5.2 and leave the rest at default and it will show up in all cores as 5.2

Here's all cores OC'd @ 5.2GH.....Bottom left corner

[JustinThyme]

Phillyflyer wrote:
Here's all cores OC'd @ 5.2GH.....Bottom left corner

Were on a different page. Multipliers don't show frequency.
Please show us in a simple fashion.
Launch CPUID then click the validate. It will take you to a webpage then C&P the link. Shows everything in a few seconds.

I do see the frequency on that one though, just not the bottom left

[Phillyflyer]

JustinThyme wrote:
Were on a different page. Multipliers don't show frequency.
Please show us in a simple fashion.
Launch CPUID then click the validate. It will take you to a webpage then C&P the link. Shows everything in a few seconds.

I do see the frequency on that one though, just not the bottom left

Bro...if this is what you want...lets go all in !!...5.3GHZ....I can pump this up to 5.4GHZ...don't mean squat...it's not stable.....just validates I can do it....all cores with 5400mhz.

[Silent_Scone]

Nice work. The 9900K is bound to get hot given we’re packing 8 cores in this die, so although it will help, don’t expect drastic temperature drops from applying LM. Looks like you’ve got a good chip there.

[Phillyflyer]

Silent Scone@ASUS wrote:
Nice work. The 9900K is bound to get hot given we’re packing 8 cores in this die, so although it will help, don’t expect drastic temperature drops from applying LM. Looks like you’ve got a good chip there.

Silent Scone...yes...seems to be a nice chip so far...Chip seems to only require 1.296v when set to auto and all cores sync'd @ 50 multiplier....seems to be on par with the 8700k that I had which required same voltage @ 5.0 GHZ with 2 less cores vs the 9900K....quite the difference in temps through between the 2 chips even though the 8700K was delidded and TG LM applied and 9900K with solder...Delidding the 9900K and applying the TG LM may only net a 4-5 degree in temps...so...may not be worth taking the chance with the chip for that gain.

[Silent_Scone]

Just putting the Formula together today. Tray CPU I have here does 5.0GHz at 1.26v. You've got a good chip 🙂

[mdzcpa]

Philly, what cooling are you running. Those temps in the 70s are darn good.