cancel
Showing results for 
Search instead for 
Did you mean: 

1901 BETA BIOS - When will it end?

ibushovskiy
Level 7
Asus when will this nightmare end and we receive a final version?

Low performance and crashes https://rog.asus.com/forum/showthread.php?124125-Z390-F-after-installing-latest-bios-and-ME-firmware...
8,015 Views
23 REPLIES 23

howxcore
Level 10
1902 is available and has been installed on my maximus xi hero wifi with no issues.

ibushovskiy
Level 7
This seems to be EPIC FAIL if Asus just deleted 1901 BIOSes and forgot to upload 1902 thinking that 1802 is 1902))

ibushovskiy
Level 7
You may check your Z390 boards. Received 1902 for Maximus XI Formula today

Shinchan0125
Level 10
Maximus XI Code seems to disappear. It looks like CODE version of the baord are phased out? Well can someone update the BIOS for Maximus XI fCodee?

https://rog.asus.com/motherboards/rog-maximus/rog-maximus-xi-code-model/helpdesk_download

Shinchan0125 wrote:
Maximus XI Code seems to disappear. It looks like CODE version of the baord are phased out? Well can someone update the BIOS for Maximus XI fCodee?

https://rog.asus.com/motherboards/rog-maximus/rog-maximus-xi-code-model/helpdesk_download



1902 https://dlcdnets.asus.com/pub/ASUS/mb/BIOS/ROG-MAXIMUS-XI-CODE-ASUS-1902.ZIP

BigJohnny
Level 13
ASUS makes good hardware. The firmware is often lacking and needs refinement. Ive had various boards where they put up a BIOS then pulled it but eventually it was made right. They aren't ignoring you unless you opened a support ticket and got nothing. This is a user self help forum and a few reps poke their heads in now and then but for the most part its other users helping each other and sponsored by ASUS.

If you continue to have issues with the 1902 open a support ticket through the product support page. It often takes a week or two to get a response but they will respond. Like everyone else they are doing the more with less people approach. There are only a handful of people that work on the software and BIOS revisions for every single product. Not the best scenario I know but thats the ways of support for anything now. I work for an international corporation worth billions and they do the same thing. First support response is from someone who doesnt know the difference from horse sheet and apple butter and are referring to a flow chart. Usually the first response you get is We are sorry you are having problems, try this.....which 99% o fthe time you have already done or it has nothing to do with your issue. Its not until it gets to level 2 support that you make any headway.

LordSabathan
Level 9
Did anyone tested 1902 on CODE XI?Any problems?

LordSabathan wrote:
Did anyone tested 1902 on CODE XI?Any problems?


If you didn't flash the latest MEI then I would not recommend 1902 as performance goes down from 13800 to 11000 in 3DMark TimeSpy

ibushovskiy wrote:
If you didn't flash the latest MEI then I would not recommend 1902 as performance goes down from 13800 to 11000 in 3DMark TimeSpy


is this performance between 1901 and 1902? Sadly i flashed it and im using now 1901 cuz i had some problems i use old bioses with older microcode...
I mainly care about stability atm...

LordSabathan
Level 9
Well i updated to 1902 and seems on prime 95 when cpu is at 100% all cores downclock at 4.2-4.4 max .I dont think thats normal i didnt notice that with other bioses it shouldnt bellow 4.7.Im using XMP1 and my temperature for all cores are arround 57-60C and still going to 4.2.
Anyone else update and noticed it?