cancel
Showing results for 
Search instead for 
Did you mean: 

Z270H no picture problem when starting up pc

Snowztorm
Level 7
Hi.When I started up my pc today there was no picture or Bios post at all so I turned the pc off and unplugged it for a while and then I got picture.This was using the Bios version 0906,same thing happend with 0801 so I wonder if anyone could help me with finding the problem.another thing was that when I had downgraded my Bios to 0801 there was a message onscreen saying:"please enter setup to recover Bios settning.When RAID configuration was built,ensure to set SATA configuration to RAID mode." I haven't installed any RAID so I'm confused why this message is appearing. I'm wondering if it's just a memory timing issue or something.My memory is Corsair Vengeance LPX DDR4 3000MHz 32GB.
2,934 Views
5 REPLIES 5

NemesisChild
Level 12
Welcome to the forum!

Have you tried clearing the CMOS?
Intel i9 10850K@ 5.3GHz
ASUS ROG Strix Z490-E
Corsair H115i Pro XT
G.Skill TridentZ@ 3600MHz CL14 2x16GB
EVGA RTX 3090 Ti FWT3 Ultra
OS: WD Black SN850 1TB NVMe M.2
Storage: WD Blue SN550 2TB NVMe M.2
EVGA SuperNova 1200 P2
ASUS ROG Strix Helios GX601

I don't know were the cmos battery is and I have someone that installs my pc parts so I have no Idea how to do that. and i dont know what qleds are either.Does anyone know what CPU VCCIO Voltage and CPU System Agent Voltage I should set to if I should change that?

I see in the bios 0906 thread here that theres similar issues that I've experiencing.My pc refused to show a picture today again and as soon as I unpluged it and the motherboard lights whent off and I pluged in the pc and started it again the picture was back again.As in the thread they say theres something wrong with the Xmp profile can this be the problem that I'm seeing? if so how do I set the best timings and voltage for my memory?