NEW BIOS IS UP Version 1301 2018/04/20 {post threat here please}

[MrAgapiGC]

Version 1301 2018/04/207.96 MBytes
MAXIMUS IX HERO BIOS 1301
Improved system stability.
Improve system performance.
Updated Intel CPU microcode.
Improved DRAM compatibility

Let me manually backup my bios since i have full stability and i want to have my record save, even that i need to add my numbers manually

Let see how that workds

[MrAgapiGC]

So far so good here. I do feel, since i am making check on the defaults presets with some changes since i have a nvme. and it seams more... snappy. volts are on check. I will continue testing and apply my nasty oc. Since i have a delid 7700k, i will check the automatic presets after i check I laste NATE settings.

[OvEr_KiLL]

just updated bios on my strix z270h and xmp wont work! it used to work on the previous 1203 and now it wont even work on it if i downgrade either

[alhadi786]

OvEr_KiLL wrote:
just updated bios on my strix z270h and xmp wont work! it used to work on the previous 1203 and now it wont even work on it if i downgrade either

i did not had this issue.

[MacLeod77]

OvEr_KiLL wrote:
just updated bios on my strix z270h and xmp wont work! it used to work on the previous 1203 and now it wont even work on it if i downgrade either

I have a z270h and am reluctant to try this. I don't want to loose my XMP for any length of time. I suppose manually setting up the RAM wouldn't be too bad, but everything is stable at the moment and can't do with the hassle 😃

Has anyone else installed on the z270h and not had this problem?

[Syberon]

MacLeod77 wrote:
Has anyone else installed on the z270h and not had this problem?

I have Z270H and use XMP profile for my Corsair LPX 3000. After BIOS upgrading i don't see any troubles with XMP.

[WhiteNoise]

The new BIOS is working fine for me. It also fixed a cold boot issue I had with the following memory kit: 2x16 GB HyperX HX430C15PB3K2/32.

Thanks.

[MacLeod77]

Syberon wrote:
I have Z270H and use XMP profile for my Corsair LPX 3000. After BIOS upgrading i don't see any troubles with XMP.

I have updated to 1301 and it's fine on my Z270h. XMP enabled OK.

I would have waited to put in on but my nvme drive died, so updated the bios pretty soon after in case it magically brought it back to life.

[Nate152]

All good with bios 1301 here.

[MrAgapiGC]

So far here is working perfect. I strongly recommend before updating, drop to defaults, restart, and upload the bios. It will be nice to know the changes. It feels, different. So I push a little more volts to the core, just for test. aside that..... no idea.