Maximus IX Code not waking up

[Ravenbear]

Just installed a Code with i7 7700K. Everything is working fine expect that it will not wake up the monitors coming out of sleep mode..
I have spent a lot of time on the net trying different things but no joy .. Looking for a solution..

[Nate152]

Hi Ravenbear

Welcome to the ROG forum.

Does it come out of sleep mode with default settings ?

[Ravenbear]

Nate152 wrote:
Hi Ravenbear

Welcome to the ROG forum.

Does it come out of sleep mode with default settings ?

No, I have to reboot it to get it to wake up and all the setting are fine..
The system wakes up but the monitors do not.

[Chino]

Clear your CMOS and test your system at stock defaults.

[Ravenbear]

Chino wrote:
Clear your CMOS and test your system at stock defaults.

I will try that, but I have changed nothing in the bios since I put it in..

I did not have this issue with the Maximums VII Formula that this one replaced,.

[Ravenbear]

Ok I this is just a short list of things I have tried . I have set my monitors to manual wake up, set my hard drives to never go to sleep, I have reset the CMOS twice now. Reinstalled my graphics drivers.. Updated the BIOS. I think it's got something to do with the BIOS settings, but as to what I do not know. It did not do this with the motherboard I replaced which was a Maximus vii Formula.. Any help would greatly appreciated..

[FuryA]

hi, Ra
Try to set slective usb wake support of USB devices

[Ravenbear]

FuryA@ASUS wrote:
hi, Ra
Try to set slective usb wake support of USB devices

Ok that is disabled already.. Should I enable it?