cancel
Showing results for 
Search instead for 
Did you mean: 

BIOS 1009 - z270

appe_
Level 7
New bios version 1009 has been released for most of the z270 boards. Lets collect our feedback here.

Changelog

Improved device compatibility.
Update SKL/KBL CPU microcode.
Improve system performance and stability.
Improve system boot time.
Fixed Logitech device issue.
Fixed Hot-key function.


Click your motherboard below to start the download:
STRIX Z270H GAMING
STRIX Z270F GAMING
STRIX Z270E GAMING
STRIX Z270G GAMING

Z270 IX Hero
Z270 IX CODE
Z270 IX Formula
Z270 IX EXTREME
MAXIMUS IX APEX

TUF Z270 MARK 1
TUF Z270 MARK 2

PRIME Z270-A
62,803 Views
98 REPLIES 98

denisgcarvalho wrote:
It happens the same thing ... this is a bug in the bios ... it was not in the bios before ... is it asus going to fix it? Should open a call on asus and report this bug on power off and on


Conseguiu resolver esse bug ? Trouxe uma Apex de fora e esta apresentando esse mesmo sintoma, porem não importa a versão da bios que eu use, sempre ocorre, estou ficando de cabelo em pé tentado resolver isso e nada, e não tenho como fazer RMA pois a maravilha da asus não tem garantia global, não espera isso de um produto caro desses da asus.

K7-PROS-6 wrote:
I´m getting the TURN ON AND OFF AND TURN ON AGAIN, with this bios, anyone knows what should i do?


Got the same thing here, and my graphic card don't start at all... i downgraded to firmware 0906 and it's ok i'm waiting for a new bios release with bugfix...

MrAgapiGC
Level 13
I find a issue. i download the xtu. it does not read the vcore informacion. Aida, cpuz etc reads ok. any ideas or someone has the same issue?
Learn, Play Enjoy!

Whatever I select for vcore it doesn't change for me when in adaptive mode or manual mode also. Anyone else?
I setted my 7700k @4.6 with 1.145 and it shows 1.245

Checked with cpuz or hwmonitor.

I encounter 1 long beep followed by 3 short beep upon starting up my PC. Based on manual, it mentioned these error is pointing to No VGA detected. But I can see the screen post as usual and then it went to Windows Desktop.

The above wont happened if I shutdown my pc and power on again. Usually it happened after long shutdown.

Oh ya, I only encounter this after I add in additional hardisk.

Any idea why this is happened and how to resolve it ?

cycheang wrote:
I encounter 1 long beep followed by 3 short beep upon starting up my PC. Based on manual, it mentioned these error is pointing to No VGA detected. But I can see the screen post as usual and then it went to Windows Desktop.

The above wont happened if I shutdown my pc and power on again. Usually it happened after long shutdown.

Oh ya, I only encounter this after I add in additional hardisk.

Any idea why this is happened and how to resolve it ?


Interesting. I did had that, since i do not have the small speaker install on the board to hear the beep sounds. For a unknown reason i change my HDMI cable and until now no problems. A long time ago, on the z97 era, there was a post regarding that. Test something. before turning on the computer, turn on your monitor first, and test. I am using a old AOC monitor since my 144hz panel start having issues. since i change my panel. errors start appearing, random not always. Since i insall the new microcode update with 1004, and now all current new drivers, I mean ALL of them. these as stop. Still making test all week with what i have.

66603
Learn, Play Enjoy!

Itzycharles wrote:
Interesting. I did had that, since i do not have the small speaker install on the board to hear the beep sounds. For a unknown reason i change my HDMI cable and until now no problems. A long time ago, on the z97 era, there was a post regarding that. Test something. before turning on the computer, turn on your monitor first, and test. I am using a old AOC monitor since my 144hz panel start having issues. since i change my panel. errors start appearing, random not always. Since i insall the new microcode update with 1004, and now all current new drivers, I mean ALL of them. these as stop. Still making test all week with what i have.

66603


I can't reproduce the problem after I restart my PC. The problem will be there again after a long period of shutdown. (maybe the next day)

I'm not sure whether I did some changes in Bios or change some of the setting from Auto to Gen 3 and caused the problem to surface.

I no longer getting these 1 long beep follow by 3 short beep anymore for few days. What I did was reset the bios. Choose XMP profile for my 3200 MHz RAM, CSM - off, Disable onboard sound..

Will further monitor if the problem back again.

Updated thread with link to MAXIMUS IX APEX bios.

GDT wrote:
Whatever I select for vcore it doesn't change for me when in adaptive mode or manual mode also. Anyone else?
I setted my 7700k @4.6 with 1.145 and it shows 1.245

Checked with cpuz or hwmonitor.


This is Intel's fault. 1.245v is your processor's max turbo vcore for stock settings. You can't go below it using adaptive. Sucks huh?

GDT
Level 7
Neither with offset?