Hi,short questions:1. Do i need driver for the AsMedia 3.1 on the Maximus IX Hero (Windows 10 64-Bit)?1a. And if yes, where can i find them?!?2. I don't want to install all the Sonic-Audio-Stuff because i don't need it... Can i use the normal Realtek...
I installed a ssd m2 hyperX predator of M2-1 slot and I get 1300-801 r/w, if you move on the same M2-2 and setting from bios x4 improve the performance of the ssd? advise me which slot to install it?very tks
less resistance for same voltage = higher currentMaybe team yellow are using lower resistivity material...Same resistivity shorter fatter traces?Maybe sample size of "the community" is statistically insignificant?
So I was looking through the manual for this motherboard and I noticed they don't even have this connector listed.Circled in green, this motherboard pic shows a connector (looks like a USB connector?) that is not in the motherboard layout pic from th...
Hi,I just recently got an Asus Z270G motherboard and paired it with an i7-7700K. System Specs are below. This is actually the 2nd 7700K that I am trying on this same Z270G motherboard, as I thought the temperature issues I was seeing is due to the 1...
Hi, can anyone help me have a problem with my motherboard and can not boot from PXE. My PC specification can be found here from my profile.I upload a screenshot.PS: Biosversion 0701Thank you.
Like an idiot I bought ram not on the QVL list for my new Code motherboard. What are my options as to using them to their maximum potential other than running them at stock speed?I have an i7 7700K as the CPU and the RAM in question is - G.SKILL Tri...
Hi,I'm waiting on stock arriving for the Z270 m-itx Strix mobo, and in the meantime am wondering about my fan and pump setup.I've got the EK D5 PWM pump, which is powered by molex, and a seperate PWM connector that pops on a fan header (so a blue and...
Initially I had both M2s in and in a raid array before everything was put in the case just to test it out. Everything worked fine.Put everything in the case and added two 850 EVOS in raid 0 plugged in to SATA ports 3 and 4. Everything working great. ...
Hello..I want ask if I connect fans to cpu socket..i dont see rpm in bios..and if i connect same 3 fans with silverstone splitter to pump header it working and show in bios.Is it faulty cpu header ?..also show error cpu fault..so i disabled.
