Z270
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Strix ROG Z207E Bluetooth, USB and Wi-fi problem

Hello,Bluetooth disappeared from everything, unfortunately I only noticed it long after I used it the last time. (seems to be a common problem in this motherboard)My USB ports stopped working out of nowhere, in fact, only one works, before posting he...

84788

Maximus IX Hero slow download speeds

I recently upgraded my docsis 3.0 cable modem to a Netgear CM1150V Docsis 3.1 modem, which is connected to my Netgear gigbit switch, which all my pcs are connected to. Everything is wired CAT6 and I'm currently hitting speeds of 930mbps/40+mbps on my...

bobalay by Level 7
  • 8114 Views
  • 2 replies
  • 0 kudos

Maximus IX Hero does not boot with F4-4133C19D at 4133MHz (Code 49)

Hello there,a couple of days ago i just bought the G.Skill F4-4133C19D-16GTZA and the IX Hero with a thrill of anticipation i can fully use the XMP Profile.The thing is, with the XMP Profile enabled, the PC won't boot (error code 49).I can only go as...

rezss by Level 7
  • 17724 Views
  • 9 replies
  • 0 kudos

unknown usb device (device descriptor request failed) IX FORMULA

Hello i am having this issue unknown usb device (device descriptor request failed) IX FORMULA if i uninstal genric usb hub it goes away only its needed and reapears again i removed all usb devices and kept only the mouse issue still there and so i ...

67912 67912
Gofran by Level 8
  • 16371 Views
  • 7 replies
  • 0 kudos

Cold Boot Issues

Hey guys, brand new build here. I have an interesting issue. I can't not get a single cold boot to work... Everytime I start off a cold boot it will get to where it normally starts to load the OS but then it goes black and goes into a windows repair ...

tsx028 by Level 7
  • 7080 Views
  • 7 replies
  • 0 kudos

Z270F fans start briefly, then off, then fully turn on normal behavior?

I have a Z270F and the RAM slots B1 and B2 don't work at all, it won't boot with RAM in either of those slots, it just stops with the motherboard LEDs stuck on yellow (the board will be RMA'd this week).But the other issue I've never seen before is ...

Goripn by Level 7
  • 1143 Views
  • 0 replies
  • 0 kudos

Fan Speed Control? BIOS vs AI Suite?

I ask this because like many others I prefer to have minimal software/boat running in the background and I have heard many people say stay away from AI Suite. But at the same time FanExpert seems pretty cool in how it calibrates and lets you adjust s...

dlerium by Level 7
  • 221436 Views
  • 21 replies
  • 0 kudos

Two m.2 SSD and one sata drive

I've been running a 512gb 960 pro in m.2_1 and one wd blue mechanical drive for about 2 years and have been pretty happy. During boxing week I purchased an xpg sx8200 pro 1tb and installed in m.2_2. there's an option in the hero ix bios to run the ...

Power button flashing in STRIX Z270F GAMING

I have the ROG STRIX Z270F GAMING and from the first time that i install it i saw that the led from the power button in my tower was flashing when my computer was on. I did not pay attention because the tower led was very little.Now that i changed to...

Tryfgr by Level 7
  • 3189 Views
  • 2 replies
  • 0 kudos

LLC on M9A using Skylake

Hey there. I could use some clarification on LLC as it is not behaving as it should, or I have the wrong idea about it.I have the M9A running a Skylake 6700K and am investigating how LLC works but am getting more and more confused. If I set no LLC, m...

AzzKickr by Level 10
  • 1552 Views
  • 1 replies
  • 0 kudos