I just migrated from another maker's motherboard to a Maximus IX Formula, and am starting to try out water cooling. Not all of my parts are here yet, but I did set up a GPU-only loop, using an EKWB EK-XRES 100 SPC-60 pump, which only uses a PWM conn...
Hi Guys,I am not really new to this forum but it is (i think) the first time I have some real troubles. A few weeks ago I bought my new System (specs see below) and noticed a problem while using the Intel HD graphic. (still waiting for the 1080 TI St...
Hello ROGer, I would like to share my personal finding about the RST Beta (Intel RST driver 15.5.0.1047).If you happened to updated this version and experienced shutdown / sleep / hibernate problems, please revert back to RST stable version. Experie...
Hello there.Just built a new system with the Z270 Apex motherboard paired with a 7700K and I'm trying to make my G.Skill TridentZ 4266MHz ram to work but the system just won't boot at that frequency. What I did was enabled the XMP profile and dialed ...
Asus EZ Update keeps telling me that there's an update for the intel gigabit ethernet driver even though I've updated many times now. I've went as far as uninstalling it in Programs and Features, downloading the installer from Asus, reinstalling it....
So i have in BIOS selected that the led are to be turned OFF when in sleep/Hibernation mode but the led keeps being on and going rainbow on the MB only the GPU is off and the sli bridge. when the system is on it is working just fine but it's like the...
I need some advice of what could be going on. Hardware list:STRIX Z270H GAMING BIOS 0906I7-7700k CPUG.SKILL Ripjaws V Series 16GB (2 x 8GB) DDR4 3200 (PC4 25600) Model F4-3200C16D-16GVKBWhen I boot up with the BIOS at the default settings everything...
On my Formula IX I installed G.skill Trident Z RGB (F4-3200C16D-16GTZR). Unfortunately, the memory is not recognized by Asus AURA or the G.skill tool.The tool aborts the boot process with the message "No Trident Z RGB modules installed". I have alrea...
I have my Apex all hooked up and running.I noticed on the mb there is a second eight pin EATX12V-2 connector below the top one.I never owned a mb with 2 of these on the board.Is it a good thing to put power to the second one also.I am overclocked now...
Can anyone tell me where I can find this setting in the bios?Bios version 801Cant find tweakers paradise or anything similar.ThankyouPaul
